Brother DCP-9045CDN Bedienungsanleitung PDF herunterladen (Seite 77)

Option

Installing extra memory B

a Turn off the machine’s power switch.

b Disconnect the interface cable from the

machine, and then unplug the power

cord from the AC power outlet.

c Remove the DIMM covers (1 and 2).

d Unpack the DIMM and hold it by its

edges.

CAUTION

To prevent damage to the machine from

static electricity, DO NOT touch the

memory chips or the board surface.

e Hold the DIMM by the edges and align

the notches in the DIMM with the

protrusions in the slot. Insert the DIMM

diagonally (1), then tilt it toward the

interface board until it clicks into

place (2).

f Put the DIMM covers (2 and 1) back on.

g Plug the machine’s power cord back into

the AC power outlet first, and then

connect the interface cable.

h Turn on the machine’s power switch.

Note

To make sure that you have installed the

SO-DIMM properly, you can print the user

settings page that shows the current

memory size. (See User Settings

List on page 24.)

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 191 192

Keine Kommentare

Brother DCP-9045CDN Bedienungsanleitung Seite 77