Brother PT-9600 Betriebsanweisung PDF herunterladen (Seite 23)

Ch. 2 Advanced Functions

Advanced Functions

9 Select the desired baud rate, and then click

the Next button.

A dialog box confirming the settings appears.

0 Check that the baud rate will be changed as

desired, and then click the Next button.

A dialog box appears, showing that the

baud rate has been changed as specified.

A Click the Finish button. A dialog box

appears, showing that installation is fin-

ished.

B Click the Finish button.

Serial (RS-232C) mode

After the PT-9600 is connected to a computer

using an RS-232C cable, the P-touch must be set

to Interface mode in order for it to be able to

communicate with the computer.

To enter/exit Interface mode

(RS-232C connection):

●

Hold down d and press 0.

NOTE

Normally “9600 bps” is selected; however, your

computer may not be able to support a baud rate of

9600 bps. If this is the case, refer to the computer’s

instruction manual, and select the maximum possi-

ble baud rate.

NOTE

To change the settings, click the Back button, and

return to step

NOTE

If a dialog box appears, explaining that the com-

puter should be restarted, select the option for

restarting the computer, click the Finish button to

restart the computer, and then remove the CD-

ROM from the computer.

Length Margin Font Width Size

AUTO 0.4 HELSINKI A AUTO

INTERFACE

RS ONLINE

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Keine Kommentare

Brother PT-9600 Betriebsanweisung Seite 23