Brother MFC-3320CN Bedienungsanleitung PDF herunterladen (Seite 23)

2 - 6 TCP/IP CONFIGURATION

NC9100h_FM6.0

Depending on the system, this entry might be called “bootps” instead

of “bootp”.

BRN_310107 1 00:80:77:31:01:07 192.189.207.3

and:

BRN_310107:ht=ethernet:ha=008077310107:\

ip=192.189.207.3:

Certain BOOTP host software implementations will not respond to

BOOTP requests if you have not included a download filename in the

configuration file; if this is the case, simply create a null file on the host

and specify the name of this file and its path in the configuration file.

As with rarp, the Print/Fax server will load its IP address from the

BOOTP server when the machine is powered on.

Other Sources of Information

Visit http://solutions.brother.com/ for more information on TCP/IP

protocol.

In order to enable BOOTP, simply use an editor to delete the

“#” (if there is no “#”, then BOOTP is already enabled). Then

edit the BOOTP configuration file (usually /etc/bootptab) and

enter the name, network type (1 for Ethernet), Ethernet

address and the IP address, subnet mask and gateway of the

Print/Fax server. Unfortunately, the exact format for doing

this is not standardized, so you will need to refer to your

system documentation to determine how to enter this

information (many UNIX systems also have template

examples in the bootptab file that you can use for reference).

Some examples of typical /etc/bootptab entries include:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 104 105

Keine Kommentare

Brother MFC-3320CN Bedienungsanleitung Seite 23