Brother MFC-9330CDW Bedienungsanleitung PDF herunterladen (Seite 5)

5

d Load paper in the tray and make sure:

 The paper is below the maximum paper

mark (bbb) a. Overfilling the paper tray will

cause paper jams.

 The side to be printed on is face down.

 The paper guides touch the sides of the

paper so it will feed properly.

e Put the paper tray firmly back in the machine.

Make sure it is completely inserted into the

machine.

f Lift the support flap a to prevent paper from

sliding off the face-down output tray.

4

Connect the power cord

and telephone line

a Connect the AC power cord to the machine and

then plug it into an AC power outlet.

b Press on the control panel.

c Connect the telephone line cord: connect one

end of the telephone line cord to the jack on the

machine marked LINE and the other end to a

modular wall jack.

For information about recommended paper,

see Basic User's Guide: Recommended

paper and print media.

IMPORTANT

DO NOT connect the interface cable

yet.

IMPORTANT

DO NOT touch the Touchscreen immediately

after plugging in the power cord or turning the

machine on. Doing this may cause an error.

IMPORTANT

The telephone line cord MUST be connected to

the jack on the machine marked LINE.

1 2 3 4 5 6 7 8 9 10 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare