Brother MFC-J615W Bedienungsanleitung PDF herunterladen (Seite 18)

Chapter 3

12

Real Time Transmission 3

When you are sending a fax, the machine will

scan the document into the memory before

sending it. Then, as soon as the telephone

line is free, the machine will start dialing and

sending.

Sometimes, you may want to send an

important document immediately, without

waiting for memory transmission. You can do

this by turning on Real Time TX.

a Press (FAX).

b Press a or b to choose Real Time TX.

c Press d or c to choose On (or Off).

Press OK.

Note

• If the memory is full and you are sending a

black & white fax from the ADF, the

machine will send the document in real

time (even if Real Time TX is set to

Off). Faxes from the scanner glass

cannot be sent until you clear some of the

memory.

• In Real Time Transmission, the automatic

redial feature does not work when you are

using the scanner glass.

Overseas Mode 3

If you are having difficulty sending a fax

overseas due to possible interference on the

telephone line, we recommend that you turn

on the Overseas mode. After you send a fax

using this feature, the feature will turn itself

off.

a Press (FAX).

b Load your document.

c Press a or b to choose

Overseas Mode.

d Press d or c to choose On (or Off).

Press OK.

Delayed Faxing

(Black & White only) 3

You can store up to 50 faxes in the memory

to be sent within 24 hours. These faxes will

be sent at the time of day you enter in step e.

a Press (FAX).

b Load your document.

c Press a or b to choose Delayed Fax.

d Press d or c to choose On.

Press OK.

e Enter the time you want the fax to be

sent (in 24-hour format).

(For example, enter 19:45 for 7:45 PM.)

Press OK.

Note

• When you set 12h Clock in the

Date&Time setting, enter the time in

12-hour format.

• The number of pages you can scan into

the memory depends on the amount of

data that is printed on each page.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare