Brother HL-4200CN Bedienungsanleitung PDF herunterladen (Seite 18)

xvii

To lift the printer, face the front of the printer and grip the recessed areas at the bottom left

and right with both hands. Never try to lift the printer by gripping any other areas. Lifting the

printer by gripping other areas can cause the printer to fall, resulting in injuries.

When lifting the printer, get a firm footing and bend your knees to avoid possible injuries to

your back.

The printer has ventilation grills on the side and at the back of the machine. Ensure that the

printer is installed no less than 150 mm (5.9 in.) from the wall on the right, 100 mm (3.9 in.)

from the wall on the left, and 200 mm (7.8 in.) from the wall at the back. A poorly ventilated

printer can cause excessive internal heat to build up and result in fire.

The diagram below shows the minimum clearances required for normal operation,

consumables replacement, and maintenance ensuring that your printer operates at peak

performance.

When moving the printer, be sure to unplug the power cord from the AC power

outlet/socket. Moving the printer with the power cord connected can damage the power

cord, which could result in a fire or an electric shock.

When moving the printer, do not tilt it at more than the angles shown in the diagram below.

If tilted excessively, the printer may fall, resulting in injuries.

After installing the optional tray module, lock down the brakes of the casters at the front of

the tray module. Failure to lock down the brakes can cause the printer to move

unexpectedly, resulting in injuries.

Recess

If you hold the printer by the

front cover, left or right

sides, there is a danger of

the printer falling.

600 mm (23.6 in.)

100 mm

(3.9 in.)

200 mm (7.8 in.)

150 mm (5.9 in.)

350 mm (13.8 in.)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 165 166

Keine Kommentare

Brother HL-4200CN Bedienungsanleitung Seite 18