Brother MFC J5910DW Bedienungsanleitung PDF herunterladen (Seite 31)

Receiving a fax

25

4

Remote Retrieval 4

You can call your machine from any

touch-tone telephone or fax machine and

then use the remote access code and remote

commands to retrieve fax messages.

Setting a Remote Access

Code 4

The Remote Access Code lets you access

the remote retrieval features when you are

away from your machine. Before you can use

the remote access and retrieval features, you

have to set up your own code. The factory

default code is the inactive code (--- ).

a Press Menu.

b Press s or t to display Fax.

c Press Fax.

d Press s or t to display

Remote Access.

e Press Remote Access.

f Enter a three-digit code using numbers

0-9, l, or # by pressing the buttons on

the screen.

Press OK.

(The preset ‘l’ cannot be changed.)

Note

Do not use the same code as your Fax

Receive Code (l 51) or Telephone

Answer Code (#51).

(uuBasic User’s Guide: Using external

and extension telephones)

g Press Stop/Exit.

Note

You can change your code at any time by

entering a new one. If you want to make

your code inactive, press in step f to

restore the inactive setting (---l) and press

OK.

Using your Remote Access

Code 4

a Dial your fax number from a touch-tone

telephone or another fax machine.

b When your machine answers, enter

your remote access code (3 digits

followed by ) at once.

c The machine signals if it has received

messages:

 1 long beep — Fax messages

 No beeps — No messages

d When the machine gives two short

beeps, enter a command.

The machine will hang up if you wait

longer than 30 seconds to enter a

command.

The machine will beep three times if you

enter an invalid command.

e Press 90 to stop Remote Access when

you have finished.

f Hang up.

Note

If your machine is set to Manual mode

and you want to use the remote retrieval

features, wait for about 100 seconds after

it starts ringing, and then enter the remote

access code within 30 seconds.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 86 87

Kommentare zu diesen Handbüchern

Keine Kommentare