Brother 888-F70 Bedienerhandbuch

Operation ManualSewing MachineProduct Code: 888-F50/F52/F60/F62/F70/F72Be sure to read this document before using the machine.We recommend that you ke

Names of Machine Parts and Their FunctionsB-2The names of the various parts of the machine and their functions are described below. Before using the m

Attaching Patches or Emblems to Shirt SleevesS-40kAfter you have sewn to the corner, stop the machine, and then select stitch again.lAfter sewing 3

Decorative StitchingSewing S-41UTILITY STITCHESSThe utility stitches contain the following decorative stitches.• Using the table below, refer to “Usin

Decorative StitchingS-42Scallop stitchingThe wave-shaped repeated pattern that looks like shells is called “scalloping”. It is used on the collars of

Decorative StitchingSewing S-43UTILITY STITCHESSShell tuck stitchingThe gathers that look like shells are called “shell tucks”. They are used to decor

Decorative StitchingS-44Heirloom stitchingWhen sewing with the wing needle, the needle holes are enlarged, creating a lace-like decorative stitch. Thi

Decorative StitchingSewing S-45UTILITY STITCHESS Drawnwork (Example 2)aPull out several threads from two sections of the fabric, separated by an unfr

Decorative StitchingS-46

Decorative sewingThis section provides instructions on sewing character stitches and decorative stitches as well as on adjusting and editing them. In

Sewing the Various Built-in Decorative PatternsD-2Selecting stitch patternsThis machine is equipped with the following decorative stitches and charact

Sewing the Various Built-in Decorative PatternsDecorative sewing D-3CHARACTER / DECORATIVE STITCHESD Character stitch patternsEach press of changes

Names of Machine Parts and Their FunctionsGETTING READYBasic operations B-3BNeedle and presser foot section1 Needle bar thread guidePass the upper thr

Sewing the Various Built-in Decorative PatternsD-4Basic sewingaSelect a decorative/character stitch pattern. bAttach monogramming foot “N”. cPlace the

Sewing the Various Built-in Decorative PatternsDecorative sewing D-5CHARACTER / DECORATIVE STITCHESDCombining patternsaSelect the first category and p

Sewing the Various Built-in Decorative PatternsD-6Checking the selected patternWhen the specified pattern is not displayed on the screen, check the pa

Sewing the Various Built-in Decorative PatternsDecorative sewing D-7CHARACTER / DECORATIVE STITCHESDbSelect (Elongation) in the settings screen, and

Sewing the Various Built-in Decorative PatternsD-8dPress .→ The next pattern selected is moved half a width to the left.ePress to specify that the

Sewing the Various Built-in Decorative PatternsDecorative sewing D-9CHARACTER / DECORATIVE STITCHESDReturning to the beginning of the patternYou can r

Sewing the Various Built-in Decorative PatternsD-10Retrieving a patternaPress once or twice until a list of saved patterns like the one shown below

Sewing the Various Built-in Decorative PatternsDecorative sewing D-11CHARACTER / DECORATIVE STITCHESDfPress the “-” or “+” key to adjust the vertical

Designing a StitchD-12With the MY CUSTOM STITCH function, you can sew stitch patterns that you design yourselfDrawing a sketch of the patternPrepare a

Designing a StitchDecorative sewing D-13MY CUSTOM STITCHDbPress on the operation panel as many times as necessary until is displayed, and press

Names of Machine Parts and Their FunctionsB-4Operation panel and operation keysThe keys with * are lit while they are ON.1 LCD (liquid crystal display

Designing a StitchD-14Examples of designsEnter each of the points indicated in the table to sew the sample stitch.Point Point1 0021 38 132 12 0 22 35

AppendixThis section provides important information for operating this machine. Please read this section to find troubleshooting tips and pointers as

Care and MaintenanceA-2Restrictions on oilingIn order to prevent damaging this machine, it must not be oiled by the user.This machine was manufactured

Care and MaintenanceAppendix A-3MAINTENANCE AND TROUBLESHOOTINGA If there is a screw in the needle plate cover1 Use the L-shaped (or disc-shaped) scr

TroubleshootingA-4If the machine stops operating correctly, check the following possible problems before requesting service.You can solve most problem

TroubleshootingAppendix A-5MAINTENANCE AND TROUBLESHOOTINGAPull the thread to pass it through the slit in the needle plate cover, then cut it with the

TroubleshootingA-6fPass the thread under the thread guide plate, and then pull it up.1 Thread guide plategWhile using your right hand to lightly hold

TroubleshootingAppendix A-7MAINTENANCE AND TROUBLESHOOTINGA Cause 2A needle and thread appropriate for the fabric are not being used.The machine need

TroubleshootingA-8Fabric is caught in the machine and cannot be removedIf the fabric is caught in the machine and cannot be removed, the thread may ha

TroubleshootingAppendix A-9MAINTENANCE AND TROUBLESHOOTINGAlRemove any threads in the race and around the feed dogs.mTurn the handwheel to raise the f

Names of Machine Parts and Their FunctionsGETTING READYBasic operations B-5BUsing the flat bed attachmentPull the top of the flat bed attachment to op

TroubleshootingA-10 Checking machine operationsIf the needle plate has been removed, check machine operations to confirm that installation has been c

TroubleshootingAppendix A-11MAINTENANCE AND TROUBLESHOOTINGAaIf the thread become tangled under the bobbin winder seat, press the “Start/Stop” button

TroubleshootingA-12List of symptoms Getting readySymptom Probable Cause Remedy ReferenceCannot thread the needle.Needle is not in the correct positio

TroubleshootingAppendix A-13MAINTENANCE AND TROUBLESHOOTINGA While sewingSymptom Probable Cause Remedy ReferenceMachine does not operate.“Start/Stop”

TroubleshootingA-14Upper thread breaks.Machine is not threaded correctly (used the wrong spool cap, spool cap is loose, the thread did not catch the n

TroubleshootingAppendix A-15MAINTENANCE AND TROUBLESHOOTINGAFabric puckers.There is a mistake in the upper or bobbin threading.Check the steps for thr

TroubleshootingA-16The fabric feeds in the opposite direction.The feed mechanism is damaged.Contact your authorized Brother dealer or the nearest Brot

TroubleshootingAppendix A-17MAINTENANCE AND TROUBLESHOOTINGA After sewingError messagesIf the “Start/Stop” button is pressed before the machine is co

TroubleshootingA-183This message is displayed when the “Start/Stop” button was pressed while the foot controller was connected.4This message is displa

TroubleshootingAppendix A-19MAINTENANCE AND TROUBLESHOOTINGA12This message is displayed when the motor locks due to tangled thread or for other reason

Names of Machine Parts and Their FunctionsB-6Included accessoriesIncluded accessories may differ from the table below depending on your model. For mor

SpecificationsA-20Operation beepEach time a key is pressed you will hear one beep. If an incorrect operation is performed you will hear two or four be

IndexAppendix A-21MAINTENANCE AND TROUBLESHOOTINGANumerics1/4" quilting foot ...

IndexA-22Manual needle threading ... B-24Mirroring ...

IndexAppendix A-23MAINTENANCE AND TROUBLESHOOTINGAUtility stitches ... B-34, B-46WWindin

English888-F50/F52/F60/F62/F70/F72Printed in VietnamXF9995-001Please visit us at http://support.brother.com/ where you can get product support and ans

Names of Machine Parts and Their FunctionsGETTING READYBasic operations B-7BOptional accessoriesThe following are available as optional accessories to

Names of Machine Parts and Their FunctionsB-8Functions available with each modelSpecifications differ depending on the machine model. For the function

Turning the Machine On/OffGETTING READYBasic operations B-9BTurning the Machine On/Off WARNING• Use only regular household electricity for the power s

Turning the Machine On/OffB-10Turning on the machineaMake sure that the machine is turned off (the main power switch is set to “ ”), and then plug the

LCDGETTING READYBasic operations B-11BViewing the LCDWhen the power is turned on, the LCD comes on, and the following screen is displayed. The screen

LCDB-12Settings screenPress to change various sewing machine operations and sewing settings.Press to move to previous/next pages.* You can also mo

LCDGETTING READYBasic operations B-13B9 Changes the size of the stitch pattern. For details, refer to “Changing the pattern size” in the “Decorative s

LCDB-14Choosing the display languageaPress .bSelect (Language) display.cUse the “-” or “+” key to choose the desired language.dPress to return to t

Winding/Installing the BobbinGETTING READYBasic operations B-15BWinding the bobbinThis section describes how to wind thread onto a bobbin.aOpen the to

Winding/Installing the BobbinB-16fSlide the spool cap onto the spool pin.Slide the spool cap as far as possible to the right, as shown, with the round

Winding/Installing the BobbinGETTING READYBasic operations B-17BgWhile holding the thread near the spool with your right hand, as shown, pull the thre

Winding/Installing the BobbinB-18nPress the “Start/Stop” button once to start winding the bobbin.When the foot controller is plugged in, press down on

Winding/Installing the BobbinGETTING READYBasic operations B-19BeRemove the bobbin cover.fHold the bobbin with your right hand with the thread unwindi

Winding/Installing the BobbinB-20jReattach the bobbin cover.Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down o

Upper ThreadingGETTING READYBasic operations B-21BThreading the upper threadaTurn on the machine.bRaise the presser foot lever to raise the presser fo

INTRODUCTIONiThank you for purchasing this machine. Before using this machine, carefully read the “IMPORTANT SAFETY INSTRUCTIONS”, and then study this

Upper ThreadingB-22ePlace the spool of thread onto the spool pin.Slide the spool onto the pin so that the spool is horizontal and the thread unwinds t

Upper ThreadingGETTING READYBasic operations B-23BlSlide the thread behind the needle bar thread guide.The thread can easily be slid behind the needle

Upper ThreadingB-24dLower the needle threader lever on the left side of the machine until it clicks, and then slowly return the lever to its original

Upper ThreadingGETTING READYBasic operations B-25BdWhile lightly holding the upper thread with your left hand, press (Needle position button) twice

Upper ThreadingB-26dInsert the horizontal spool pin onto the bobbin winder shaft.Insert the horizontal spool pin so that it is perpendicular to the bo

Upper ThreadingGETTING READYBasic operations B-27BnStart sewing.• For details on starting to sew, refer to “STARTING TO SEW” on page B-33.→ Two lines

Replacing the NeedleB-28Be sure to observe the following precautions concerning the handling of the needle. Failure to observe these precautions is ex

Replacing the NeedleGETTING READYBasic operations B-29BChecking the needleSewing with a bent needle is extremely dangerous since the needle may break

Replacing the NeedleB-30gWhile holding the needle with your left hand, use the screwdriver to tighten the needle clamp screw.Turn the screw toward the

Replacing the Presser FootGETTING READYBasic operations B-31BReplacing the presser footaPress (Needle position button) once or twice to raise the ne

IMPORTANT SAFETY INSTRUCTIONSii5Always keep your work area clear:• Never operate the machine with any air openings blocked. Keep ventilation openings

Replacing the Presser FootB-32Removing and attaching the presser foot holderRemove the presser foot holder when cleaning the machine or when installin

SewingBasic operations B-33STARTING TO SEWBStitch selection methodsA stitch can be selected from the following methods available.Stitch patterns can b

SewingB-34 Character stitchesThere are five character stitch modes: Gothic font mode , Handwriting font mode , Outline font mode , Cyrillic font mo

SewingBasic operations B-35STARTING TO SEWBSewing a stitchaTurn the main power to ON and push (Needle position button) to raise the needle.bSelect t

SewingB-36kWhen the needle has stopped moving, raise the presser foot and remove the fabric. Using the foot controllerYou can also use the foot contr

SewingBasic operations B-37STARTING TO SEWBSewing reinforcement stitchesReverse/reinforcement stitches are generally necessary at the beginning and en

SewingB-38dPress (Reverse stitch button) or (Reinforcement stitch button).1 Reverse stitches (or reinforcement stitches) → The machine will sew re

Setting the StitchBasic operations B-39STARTING TO SEWBThis machine is preset with the default settings for the stitch width and stitch length for eac

Setting the StitchB-40Setting the thread tensionYou may need to change the thread tension, depending on the fabric and thread being used. Correct thr

Setting the StitchBasic operations B-41STARTING TO SEWBPushing the thread tension dial toward the right makes the thread tension tighter.Saving stitch

IMPORTANT SAFETY INSTRUCTIONSiiiSAVE THESE INSTRUCTIONSThis machine is intended for household use.FOR USERS IN COUNTRIES EXCEPT EUROPEAN COUNTRIESThis

Useful FunctionsB-42Automatically cutting the threadThe machine can be set to automatically cut the threads at the end of the stitching. This is calle

Useful FunctionsBasic operations B-43STARTING TO SEWBAdjusting the presser foot pressureYou can adjust the presser foot pressure (the amount of pressu

Useful FunctionsB-44aSelect a stitch.bPress to select the pivot function.→ The key will be lit.cPlace the fabric under the presser foot with the nee

Useful FunctionsBasic operations B-45STARTING TO SEWB Adjusting free motion presser foot heightaSelect (Free motion foot height) in the settings sc

Stitch Setting ChartB-46Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches in the followi

Stitch Setting ChartBasic operations B-47STARTING TO SEWB14*112*13 steps elastic zigzag stitchJ*2Overcasting (medium, heavyweight and stretch fabrics)

Stitch Setting ChartB-4832 27Hand-look quilting stitchJ*2Quilting stitch made to look like hand quilting stitch0.0 (0)0.0 - 7.0(0 - 1/4)2.5 (3/32)0.4

Stitch Setting ChartBasic operations B-49STARTING TO SEWB52 46Serpentine stitchN*2Decorative stitching and attaching elastic5.0 (3/16)0.0 - 7.0(0 - 1/

Stitch Setting ChartB-5072 56HemstitchingN*2Heirloom, decorative hems5.0 (3/16)0.0 - 7.0(0 - 1/4)2.0 (1/16)0.4 - 5.0(1/64 - 3/16)OK( J )Reinforce-ment

Stitch Setting ChartBasic operations B-51STARTING TO SEWB90 70Button sewing stitch MAttaching buttons 3.5 (1/8)2.5 - 4.5(3/32 - 3/16)— NOReinforce-men

ABOUT THIS MANUALivThis manual was written for several machine models.The machine models are categorized according to their specifications and referre

Stitch Setting ChartB-52 Preset utility stitchesThe most frequently used utility stitches have been assigned to the numeric keys.These stitches can b

SewingThis section describes procedures for using the various utility stitches as well as other functions. It provides details on basic sewing in addi

Sewing TipsS-2Trial sewingAfter you have set up the machine with the thread and needle appropriate for the type of fabric being sewn, the machine auto

Sewing TipsSewing S-3SEWING ATTRACTIVE FINISHESSSewing an even seam allowanceTo sew an even seam, start sewing so that the seam allowance is to the ri

Sewing Various FabricsS-4Sewing thick fabrics If the fabric does not fit under the presser footIf the fabric does not fit easily under the presser fo

Sewing Various FabricsSewing S-5SEWING ATTRACTIVE FINISHESSSewing stretch fabricsFirst, baste the pieces of fabric together, and then sew without stre

Basic StitchingS-6Straight stitches are used for sewing plain seams.• Using the table below, refer to “Using the utility stitch tables in the “Sewing”

Basic StitchingSewing S-7UTILITY STITCHESS Changing the needle positionThe needle position used as the baseline is different for the straight stitch

Blind Hem StitchingS-8Secure the bottoms of skirts and pants with a blind hem.• Using the table below, refer to “Using the utility stitch tables in th

Blind Hem StitchingSewing S-9UTILITY STITCHESSiSlide the item that you wish to sew onto the free arm, make sure that the fabric feeds correctly, and t

CONTENTSvINTRODUCTION... iIMPORTANT SAFETY INSTRUCTIONS ... iABOUT THIS MANUAL ...

Blind Hem StitchingS-10lSew with the fold of the hem against the presser foot guide.mPress the “Start/Stop” button to stop sewing when you are finishe

Overcasting StitchesSewing S-11UTILITY STITCHESSSew overcasting stitches along the edges of cut fabric to prevent them from fraying.Sewing overcasting

Overcasting StitchesS-12Sewing overcasting stitches using zigzag foot “J”• Using the table below, refer to “Using the utility stitch tables in the “Se

Overcasting StitchesSewing S-13UTILITY STITCHESSaRemove the presser foot.bHook the connecting fork of the side cutter onto the needle clamp screw.1 Co

Buttonhole Stitching/Button SewingS-14• Using the table below, refer to “Using the utility stitch tables in the “Sewing” section” in the “Basic operat

Buttonhole Stitching/Button SewingSewing S-15UTILITY STITCHESSaUse chalk to mark on the fabric the position and length of the buttonhole.1 Marks on fa

Buttonhole Stitching/Button SewingS-16gGently hold the end of the upper thread in your left hand, and then start sewing.→ Once sewing is completed, th

Buttonhole Stitching/Button SewingSewing S-17UTILITY STITCHESSaHook the gimp thread onto the part of buttonhole foot “A” shown in the illustration.bIt

Buttonhole Stitching/Button SewingS-18gTurn the handwheel toward you (counterclockwise) to check that the needle correctly goes into the two holes of

Zipper InsertionSewing S-19UTILITY STITCHESS• Using the table below, refer to “Using the utility stitch tables in the “Sewing” section” in the “Basic

CONTENTSviD Decorative sewingChapter 1 CHARACTER / DECORATIVE STITCHES 2Sewing the Various Built-in Decorative Patterns... 2Selecting stitch patterns

Zipper InsertionS-20hSelect stitch .iTopstitch around the zipper.1 Stitching2 Right side of fabric3 Basting stitching4 End of zipper openingjRemove t

Zipper InsertionSewing S-21UTILITY STITCHESSePress the seam allowance so that the right side (the side that will not be stitched) has an extra 3 mm (1

Zipper InsertionS-22nTopstitch around the zipper.Sew reverse stitches at the end of the zipper opening and align the zipper teeth with the side of the

Zipper/piping InsertionSewing S-23UTILITY STITCHESSA zipper and piping can be sewn in place.• Using the table below, refer to “Using the utility stitc

Zipper/piping InsertionS-24hTopstitch around the zipper.1 Stitching2 Right side of fabric3 Basting stitching4 End of zipper openingiRemove the basting

Sewing Stretch Fabrics and Elastic TapeSewing S-25UTILITY STITCHESS• Using the table below, refer to “Using the utility stitch tables in the “Sewing”

Appliqué, Patchwork and Quilt StitchingS-26• Using the table below, refer to “Using the utility stitch tables in the “Sewing” section” in the “Basic o

Appliqué, Patchwork and Quilt StitchingSewing S-27UTILITY STITCHESSfTurn the handwheel toward you (counterclockwise), and then begin sewing around the

Appliqué, Patchwork and Quilt StitchingS-28 Piecing using the 1/4" quilting foot with guide (sold separately with some models)This quilting foot

Appliqué, Patchwork and Quilt StitchingSewing S-29UTILITY STITCHESSeStart sewing.fWhen the end of the stitching is reached, stop the machine.Sew until

Basic operationsThis section provides details on the initial setup procedures as well as descriptions of this machine’s more useful functions.Page num

Appliqué, Patchwork and Quilt StitchingS-30 Using the quilting guide (sold separately with some models)Use the quilting guide to sew parallel stitche

Appliqué, Patchwork and Quilt StitchingSewing S-31UTILITY STITCHESSeHold the quilting foot in place with your right hand, and tighten the presser foot

Appliqué, Patchwork and Quilt StitchingS-32eAttach free motion quilting foot “C” at the front with the presser foot holder screw aligned with the notc

Appliqué, Patchwork and Quilt StitchingSewing S-33UTILITY STITCHESSaSlide the feed dog position switch, located at the rear of the machine on the base

Appliqué, Patchwork and Quilt StitchingS-34Finished projectgAfter sewing is finished, slide the feed dog position switch lever to (to the right as s

Reinforcement StitchingSewing S-35UTILITY STITCHESSReinforce points that will be subject to strain, such as sleeve holes, inseams and pocket corners.•

Reinforcement StitchingS-36ePull down the buttonhole lever as far as possible.1 Buttonhole leverThe buttonhole lever is positioned behind the bracket

Reinforcement StitchingSewing S-37UTILITY STITCHESSdPosition the fabric so that the needle is 2 mm (1/16 inch) in front of the area to be darned.1 Tea

Eyelet StitchingS-38Eyelets, such as those on belts, can be sewn.• Using the table below, refer to “Using the utility stitch tables in the “Sewing” se

Attaching Patches or Emblems to Shirt SleevesSewing S-39UTILITY STITCHESSUse these stitch patterns to attach patches or emblems to pant legs, shirt sl