Brother Computerized Embroidery Sewing Machine Bedienerhandbuch PDF herunterladen (Seite 109)

Reinforcement Stitching 107

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Memo

z When lowering the presser foot, do not push

in the front of the presser foot, otherwise the

darning will not be sewn with the correct

size.

a Do not reduce the gap.

Pull down the buttonhole lever as far as

possible.

a Buttonhole lever

The buttonhole lever is positioned behind the

bracket on the buttonhole foot.

a Buttonhole lever

b Bracket

Gently hold the end of the upper thread in

your left hand, and then start sewing.

X Once sewing is completed, the sewing

machine automatically sews reinforcement

stitches, then stops.

Raise the presser foot lever, remove the fabric,

and then cut the threads.

Raise the buttonhole lever to its original

position.

Memo

z If the fabric does not feed, for example,

because it is too thick, increase the stitch

length. For details, refer to "Adjusting the

stitch length" (page 59).

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 171 172

Keine Kommentare

Brother Computerized Embroidery Sewing Machine Bedienerhandbuch Seite 109