Brother DA-9280 Bedienerhandbuch

DA-9280Please read this manual before using the machine.Please keep this manual within easy reach for quick reference.THREE NEEDLE (TWIN NEEDLE) FEED

DA-928055-3. Installing the pulley cover1. Place the belt w onto the machine pulley q.* Pull the belt w upward when installing pulley coverA e.2. Plac

DA-928065-4. Belt tension adjustment1. Place the V-belt e onto the motor pulley w.2. Turn the two nuts r to adjust so that there is 20 - 30mm of defle

DA-92807 CAUTION5-6. Lubrication¡ Be sure to wear protective goggles and gloves when handling the lubricating oil, so that no oil gets intoyour eyes o

DA-92808 CAUTION5-7. Checking the machine pulley rotating direction¡ Do not touch any of the moving parts or place any objects against the machine whi

DA-92809¡ Turn off the power switch before threading the upper thread, otherwise the machine may operate if thetreadle is pressed by mistake, which co

DA-928010¡ Attach all safety devices before using the sewing machine. If the machine is used without these devicesattached, injury may result.¡ Turn o

DA-9280118. THREAD TENSION8-1. Adjusting the thread tension1. Adjust the upper thread tension properly by turning up-per thread adjusting screw q.2. A

DA-928012¡ Turn off the power supply before adjusting the stitch length, otherwise the machine will operate if the treadleis pressed by mistake, which

DA-928013CorrectNeither non-alignment nor sewing wrinkles. Neither non-alignment nor sewing wrinkles.Puller feed Fabric with high elasticity Fabric wi

DA-9280149-2. Changing the lubricating oil (every three months)¡ Turn off the power switch before carrying out cleaning. The motor will keep turning e

DA-9280iThank you very much for buying a BROTHER sewing machine. Before using your new machine, pleaseread the safety instructions below and the expla

DA-928015 CAUTION10. STANDARD ADJUSTMENTS¡ Maintenance and inspection of the sewing ma-chine should only be carried out by qualifiedpersonnel.¡ Ask yo

DA-92801610-2. Needle and looper timing adjustmentLooper forward travel Looper backward travelMake an adjustment so that, when needles q are downlowe

DA-92801710-3. Timing of loopers running clear of needlesThe loopers run in back of the needles in their forwardtravel and in front of the needles in

DA-92801810-5. Feed dog height adjustmentMake an adjustment so that the highest part of the feed dogwill be 1.2 mm above the top surface of the needl

DA-92801910-7. Upper thread take-up thread guide adjustmentAdjust the distance between the center of the upper threadtake-up and the top of the threa

DA-92802010-11. Installing the lapperInsert the lapper guide plate from the front into the ovalslot in the forward feed arm cover, making sure that t

DA-92802111. INSTALLING OPTIONAL PARTS CAUTION CAUTION¡ Installation of optional parts should only becarried out by a qualified technician.¡ Turn off

DA-9280224. Fill the thread cooler tank assembly q with silicone oily.11. INSTALLING OPTIONAL PARTSqyr5. Pass the thread through the thread guide r.

DA-928023Problem Possible cause Page CAUTION¡ Turn off the power supply before adjusting the stitch length, otherwise the machine will operate if the

DA-928024Problem Possible cause Page6. Upper and lower threadsare breaking.¡ Is the needle bent or is the needle tip broken?Replace the needle if it i

DA-9280iiCleaningSewing CAUTION¡ This sewing machine should only beused by operators who have receivedthe necessary training in safe use before-hand.¡

INSTRUCTION MANUALPrinted in Japan118-928S92928-1022002.03. B (1)15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone: 81-52-824-2177BROTHER

DA-9280iiic Warning labels★ The following warning labels appear on the sewing machine.Please follow the instructions on the labels at all times when u

DA-9280ivCONTENTS1. NAMES OF MAJOR PARTS... 012. MACHINE SPECIFICATIONS ... 013. OPTIONAL PARTS...

DA-92801q Machine pulleyw Front covere Presserr Needle bart Upper thread nippery LapperSafety deviceu Thread take-up coveri Finger guardo Pulley cover

DA-92802Pulley O.D. 85 90 95 100 105 110 115 120 125 130M45,,,,,.../../../../../Belt size (inches)M46,,,,,...

DA-92803 CAUTION CAUTION5. INSTALLATION¡ The sewing machine should only be installedby a qualified technician.¡ Ask your Brother dealer or a qualified

DA-928043. Place the machine head on the table, adjust its posi-tion in forward and backward directions by aligning itwith the hole for presser bar li