Brother Innov-is 700E Bedienungsanleitung PDF herunterladen (Seite 28)

Brother

Quilting

Feet

SA187

F061: XE1097-001

ABCDEFGHMNO

SA129

F005N: XC1948-002

ABCDEFGHMNO

SA165

F040N: XC1972-002

Open Toe Quilting Foot

Quilting Foot

Open Toe Quilting Foot

The large opening on the front of the foot gives you wide visibility in

the needle area. Use for free-motion, outline quilting, etc.

1. Screw on the Open Toe Quilting Foot, with the pin over the needle clamp screw.

2. Lower the feed dogs.

3. Use the foot controller so that both hands are free to guide the fabric.

4. Select a straight stitch or your preferred stitch such as zigzag stitch.

5. Set the fabric under the presser foot.

6. While starting to sew, press the needle position button twice to pull the bobbin thread

to the quilt top.

7. Gently holding the upper and bobbin threads sew about four locking stitches.

8. Guide the fabric with both hands while keeping the fabric pulled tight.

9. When quilting is finished, sew about four locking stitches and finish the thread ends.

Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and

PC-8500 sewing machines.

Quilting Foot

For darning, quilting, or free-motion. The foot raises and lowers

with the needle to allow fabric to be moved between stitches and to

hold fabric in place while stitches are created.

1. Lower the feed dogs.

2. Set the machine for straight stitch.

3. Place the fabric beneath the presser foot.

4. Use both hands to hold the fabric firmly.

5. Begin to sew moving the fabric at an even pace in order to sew uniform stitches roughly

2.0 - 2.5 mm in length.

Requires Low Shank Adapter for ULT series, PC-6500, PC-8200 and

PC-8500 sewing machines.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Keine Kommentare

Brother Innov-is 700E Bedienungsanleitung Seite 28