Brother MFC-5100C Bedienungshandbuch PDF herunterladen (Seite 149)

Troubleshooting and Maintenance 138

MAINTENANCE

For 600 DPI, press the number of the test print that most

closely matches the number 0 sample (1-8).

For 1200 DPI, press the number of the test print that

most closly matches the number 0 sample (1-8).

Repeat Steps 1 and 2 (in Print Quality Check) to

print another sample Print Quality Check Sheet and

then check it.

Press Stop/Exit.

If you still see missing ink in this Print Quality Check Sheet, repeat the cleaning and

test print procedures at least five times. If ink is still missing after the fifth cleaning

and test print, replace the ink cartridge for the clogged colour. (Perhaps the ink

cartridge was in the machine over six months or the expiration date written on the

cartridge package has passed. Or, the ink may not have been stored properly before

use.)

After replacing the ink cartridge, check it by printing another Print Quality Check

Sheet. If the problem still exists, repeat the cleaning and test print procedures at

least five times for the new ink cartridge. If ink is still missing, call your Brother

dealer or Brother for Service.

Do NOT touch the print heads as this may cause damage to the print heads

or product. Such damages will not be covered by warranty.

600DPI ADJUST

SELECT BEST #

1200DPI ADJUST

SELECT BEST #

When an ink head nozzle is clogged

the printed sample looks like this.

After the ink head nozzle is cleaned,

the horizontal lines are gone.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 179 180

Keine Kommentare

Brother MFC-5100C Bedienungshandbuch Seite 149