Brother MFC-8700 Spezifikationen PDF herunterladen (Seite 67)

TROUBLESHOOTING WINDOWS

SOFTWARE DIFFICULTIES

8 - 3

Paper

Handling

Difficulties

Video

Capture

DIFFICULTY SUGGESTIONS

“Unable to write to 1. Make sure the MFC is on (plugged into the AC

LPT1” or “LPT1 outlet) and that is connected directly to the

already in use” error computer using the bundled IEEE-1284

message appears. bi-directional parallel cable. The cable must not

go through another peripheral device (such as a

“MFC is Busy” or Zip Drive, External CD-ROM Drive, or Switch

“MFC Connect box).

Failure” error 2. Make sure the MFC’s LCD screen is not

message appears. displaying an error message.

3. Make sure no other device drivers, which also

communicate through the parallel port, are

running automatically when you boot up the

computer (such as, drivers for Zip Drives,

External CD-ROM Drive, etc..) Suggested

areas to check: (Load=, Run= command lines

in the win.ini file or the Statup Group)

4. Check with you computer manufacturer to

confirm that the computer’s parallel port

settings in the BIOS are set to support a bi-

directional machine, i.e. (Parallel Port Mode-ECP).

How can I load You can load envelopes from either the multi-

envelopes? purpose paper cassette or the manual feed slot. Your

application software must be set up to print the

envelope size you are using. This is usually done in

the Page Setup or Document Setup menu of your

software. Refer to your application manual.

Video does not show Check the video cable connection to the MFC’s RCA

“Video: Press Copy” pin jack. Check that the video equipment is sending

a signal (video equipment is turned on and set to the

correct setting).

Software

Difficulties

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 84 85

Keine Kommentare

Brother MFC-8700 Spezifikationen Seite 67