Brother MFC-9840CDW Betriebsanweisung

NETWORK USER’S GUIDEMulti-Protocol On-board Ethernet Multi-function Print Server and Wireless (IEEE 802.11b/g) Ethernet Multi-function Print ServerMFC

ixA Appendix A 169Using services ...

Control panel setup906SMTP Server 6This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your network.(Ex

Control panel setup916Auth. for SMTP 6You can specify the security method for E-mail notification. For details on security methods for E-mail notifica

Control panel setup926POP3 Server 6This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the Brother mac

Control panel setup936Mailbox Name 6You can specify a mailbox name on the POP3 server where the internet print jobs are to be retrieved.a Press Menu.b

Control panel setup946APOP 6You can enable or disable the APOP (Authenticated Post Office Protocol).a Press Menu.b Press a or b to choose LAN.Press OK

Control panel setup956Poll Frequency 6Sets the interval for checking for new messages on the POP3 server (default is 10Min).a Press Menu.b Press a or

Control panel setup966Del Error Mail 6When set to On, the machine automatically deletes error mails that the machine can not receive from the POP serv

Control panel setup976Setup Mail TX (of Setup IFAX menu) 6This menu has three selections: Sender Subject, Size Limit and Notification.Sender Subject 6

Control panel setup986Size Limit 6Some E-mail servers do not allow you to send large E-mail documents (the System Administrator will often place a lim

Control panel setup996Setup Relay (of Setup IFAX menu) 6This menu has three selections Rly Broadcast, Relay Domain and Relay Report. For more informat

111Overview 1The Brother machine can be shared on a 10/100 Mb wired or IEEE 802.11b/802.11g wireless Ethernet network using the internal network print

Control panel setup1006h Press Stop/Exit.Relay Report 6A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all

Control panel setup1016NoteFor how to operate Scan to E-mail (E-mail server), see Network Scanning of the Software User’s Guide on the CD-ROM. Scan to

Control panel setup1026Fax to Server 6The Fax to Server feature allows the machine to scan a document and send it over the network to a separate fax s

Control panel setup1036i Enter the suffix using dial pad.j Press OK.k Press Stop/Exit.NoteYou can enter the prefix and suffix address using up to a to

Control panel setup1046Restoring the network settings to factory default 6If you wish to reset the print server back to its default factory settings (

Control panel setup1056Printing the Network Configuration List 6NoteNode name: Node name appears in the Network Configuration List. The default node n

10677Overview 7The Driver Deployment Wizard software can be used to ease the installation or even automate the installation of network connected print

Driver Deployment Wizard (Windows® only)1077Network Shared 7The device is connected to a network and a central print queue is used to manage all print

Driver Deployment Wizard (Windows® only)1087How to install the Driver Deployment Wizard software 7a Put the supplied CD-ROM into your CD-ROM drive. If

Driver Deployment Wizard (Windows® only)1097Using the Driver Deployment Wizard software 7a When you run the Wizard for the first time you will see a w

Introduction21Due to these factors, wireless may not be the best method of connection for all types of documents and applications. If you are printing

Driver Deployment Wizard (Windows® only)1107f Click Next after you choose the correct driver.g A summary screen will appear. Confirm the settings of t

11188Overview 8If you are a Windows® user and want to print using the TCP/IP protocol in a Peer-to-Peer environment, please follow the instructions in

Network printing from Windows®: basic TCP/IP Peer-to-Peer printing1128g Follow the on-screen instruction, and then click OK.NoteContact your administr

11399Overview 9Windows® 2000/XP, Windows Vista™ and Windows Server® 2003 users can print using TCP/IP using the standard Network Printing software and

Internet printing for Windows®1149NoteIf you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can also enter t

Internet printing for Windows®1159For Windows® 2000/XP and Windows Server® 2003 9a For Windows® XP and Windows Server® 2003:Click the Start button and

Internet printing for Windows®1169g When you click Next, Windows® 2000/XP and Windows Server® 2003 will make a connection with the URL that you specif

Internet printing for Windows®1179Specifying a different URL 9Please note that there are several possible entries that you can enter for the URL field

1181010Overview 10This chapter explains how to configure the BR-Script 3 (PostScript® 3™ language emulation) printer driver on a Network using Mac OS®

Network printing from Macintosh®11910g (Mac OS® X 10.2.4 to 10.3.x) Enter the IP address of the printer into the Printer Address box.(Mac OS® X 10.4)

Introduction31Network features 1Your Brother machine has the following basic network functions.Network printing 1The print server provides printing se

Network printing from Macintosh®12010h From the Printer Model pull-down list choose your model. For example, choose Brother MFC-9840CDW BR-Script3.i C

1211111Overview 11A standard Web Browser can be used to manage your machine using the HTTP (Hyper Text Transfer Protocol). You can get the following i

Web Based Management12211How to connect to your machine using a Browser 11Type “http://printer’s IP address/” into your browser (where “printer’s IP a

Web Based Management12311Changing the LDAP configuration using a Browser 11You can configure and change the LDAP settings using a web browser. LDAP E

1241212Overview 12The LDAP protocol allows you to search for information such as fax numbers and E-mail addresses from your server. You can configure

1251313Overview 13Internet faxing (I-Fax) allows you to send and receive fax documents using the Internet as the transport mechanism. Documents are tr

Internet fax12613Control panel key functions 13Shift + 1 13Used to change input mode. You can use dial pad keys as Standard alphabet character keys.Di

Internet fax12713Manually entering text 13Press Shift and 1 simultaneously to change into the “alphabet” dialling mode.You can use the Dial Pad to dia

Internet fax12813Receiving an Internet fax to your computer 13When a computer receives an Internet fax document, the document is attached to a mail me

Internet fax12913Relay broadcast from a machine 13 In this example, your machine has an E-mail address of [email protected], you wish to send a document

Introduction41BRAdmin Professional (for Windows®) 1BRAdmin Professional is a utility for more advanced management of network connected Brother devices

Internet fax13013Relay broadcast from a computer 13 You can also send E-mail from your computer and have it relayed to a conventional fax machine. The

Internet fax13113Setup Mail TX 13You can set the Notification option in the Setup Mail TX option to either On or Off. When switched to On an additiona

Internet fax13213Important information on Internet fax 13Internet fax communication on a LAN system is basically the same as communication via E-mail;

1331414Overview 14In today’s world there are many security threats to your network and the data that travels over it. Your Brother machine employs som

Security features13414Security protocols 14The Brother print server supports the following security protocols.NoteHow to configure the protocol settin

Security features13514Configuring the protocol settings 14You can enable or disable each protocol and security method using Web Based Management (web

Security features13614Managing your network printer securely 14To manage your network printer securely, you need to use the management utilities with

Security features13714Secure Management using BRAdmin Professional (for Windows®) 14To use the BRAdmin Professional utility securely, you need to foll

Security features13814Printing documents securely using IPPS 14To print documents securely over the internet, you can use the IPPS protocol.Note• Comm

Security features13914Using E-mail notification with user authentication 14To use the E-mail notification function via secure SMTP server that require

Introduction51Types of network connections 1Network connection example 1Generally there are two types of network connections. Peer-to-Peer and Network

Security features14014f You can configure the POP3/SMTP settings on this page. Note• You can also change the SMTP port number using Web Based Manageme

Security features14114Creating and installing a certificate 14The Brother print server allows you to use SSL/TLS communication by configuring a certif

Security features14214NoteIf you have edited the hosts file on your computer or are using a Domain Name System, you can also enter the DNS name of the

Security features14314Creating and installing a self-signed certificate 14How to create and install a self-signed certificate 14a Click Create Self-Si

Security features14414How to install the self-signed certificate on your computer 14NoteThe following steps are for Microsoft Internet Explorer. If yo

Security features14514d Type “https://printer’s IP address/” into your browser to access your printer (where “printer’s IP address” is the printer’s I

Security features14614For Windows Vista™ users that do not have administrator rights 14a Click Start and All Programs.b Right click Internet Explorer,

Security features14714d Type “https://printer’s IP address/” into your browser to access your printer (where “printer’s IP address” is the printer’s I

Security features14814g Click Next. h Make sure that DER encoded binary X.509 (.CER) is chosen, and then click Next. i Click Browse...

Security features14914j Click Browse Folders. k Choose a folder you want to save the certificate file in and enter a file name, and then click Save. N

Introduction61Network Shared printing 1In a Network Shared environment, each computer sends data via a centrally controlled computer. This type of com

Security features15014m Click Finish. n Click OK. o Click OK.

Security features15114p Open the folder that you saved the certificate file in k and double-click the certificate file. For the rest of the instructio

Security features15214d Click Install Certificate… from the General tab. e When the Certificate Import Wizard appears, click Next. f Choose Place all

Security features15314g Choose Trusted Root Certification Authorities and then, click OK. h Click Next. i Click Finish.

Security features15414j Click Yes, if the fingerprint (thumbprint) is correct. NoteThe fingerprint (thumbprint) is printed on the Network Configuratio

Security features15514Creating CSR and installing a certificate 14How to create the CSR 14a Click Create CSR on the Configure Certificate page.b Enter

Security features15614How to install the certificate to your printer 14When you receive the certificate from a CA, follow the steps below to install i

Security features15714Import and export the certificate and private key 14How to import the certificate and private key 14a Click Import Certificate a

Security features15814How to export the certificate and private key 14a Click Export Certificate and Private Key on the Configure Certificate page.b E

1591515Overview 15This chapter explains how to resolve typical network problems you may encounter when using the machine. If, after reading this chapt

Introduction71Wireless network connection example 1Connected to a wireless capable computer with an access point on the network (Infrastructure mode)1

Troubleshooting16015Windows Vista™ users: 15a Click the Start button, Control Panel, Network and Internet, Windows Firewall and click Change settings.

Troubleshooting16115b (For wired network) Check to see if there is any LED activity. Brother print servers have two LEDs on the back panel of the mach

Troubleshooting16215a personal Firewall software, see the User’s Guide for your software or contact the software manufacturer.Printing problems 15Prin

Troubleshooting16315Error during printing 15If you try to print while other users are printing large amounts of data (e.g. many pages or color pages w

Troubleshooting16415Scanning and PC Fax problems 15The network scanning feature does not work in Windows®The network PC Fax feature does not work in W

Troubleshooting16515i Make sure if the new setting is added and is checked, and then click OK.NoteAfter the Brother software package is installed, re-

Troubleshooting16615Wireless network troubleshooting 15Wireless setup problems 15The Brother print server is not found during setup by the Wireless De

Troubleshooting16715Protocol-specific troubleshooting 15Windows® 2000/XP, Windows Vista™ and Windows Server® 2003 IPP troubleshooting 15I want to use

Troubleshooting16815LDAP troubleshooting 15If you are having trouble connecting to a Windows® LDAP server, please contact your Network Administrator a

169AAUsing services AA service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print serve

Introduction81An access point is on the network, but the computer is not wireless capable 1This type of network has a central access point at the hear

Appendix A170AUsing BOOTP to configure the IP address ABOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet

Appendix A171AUsing RARP to configure the IP address AThe Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on

Appendix A172A Windows® systemsWindows® systems require the dash “-” character between each digit of the Ethernet address.arp -s 192.168.1.2 00-80-77

Appendix A173A255.0.0.0 for class A networks255.255.0.0 for class B networks255.255.255.0 for class C networksThe leftmost group of digits in your IP

Appendix A174AUsing the Brother Web BRAdmin server software for IIS to configure the IP address AThe Web BRAdmin server software is designed to manage

175BBPrint server specifications BEthernet wired network B1PC Fax Send for Mac®2Printing only for Windows Server® 20033BRAdmin Professional and Web BR

Appendix B176BEthernet wireless network BNetwork board model nameNC-7300wLAN You can connect your machine to a network for Network Printing, Network S

Appendix B177B1PC Fax Send for Mac®2Only printing for Windows Server® 20033BRAdmin Professional and Web BRAdmin are available as a download from http:

Appendix B178BComputer requirements B1For WIA, 1200x1200 resolution. Brother Scanner Utility enables to enhance up to 19200 x 19200 dpi.2Third party U

Appendix B179BAuthentication and encryption for wireless users only BAuthentication method BThe Brother machine supports the following methods: Open

Introduction91Protocols 1TCP/IP protocols and functionalities 1Protocols are the standardized sets of rules for transmitting data on a network. Protoc

Appendix B180BNetwork key BThere are some rules for each security method: Open system/Shared key with WEPThis key is a 64-bit or 128-bit value that m

Appendix B181BFunction table and default factory settings BThe factory settings are shown in Bold with an asterisk.Main Menu Submenu Menu Selections O

Appendix B182B7.LAN(continued)1.Wired(continued)3.Set to Default 1.Reset —2.Exit—4.Wired Enable On*Off2.WLAN 1.TCP/IP 1.BOOT Method Auto*StaticRARPBOO

Appendix B183B7.LAN(continued)2.WLAN(continued)4.WLAN Status 1.Status Active(11b)Active(11g)Wired LAN ActiveWLAN OFF Connection NG (for USA) orConnect

Appendix B184B7.LAN(continued)3.Setup IFAX(continued)1.Setup Internet(continued)7.Mailbox Name—8.Mailbox Pwd—9.APOP OnOff*2.Setup Mail RX 1.Auto Polli

Appendix B185B1On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.7

Appendix B186BEntering Text BWhen setting certain menu selections, such as the Station ID, you will need to type text characters. The dial pad keys ha

Appendix B187BRepeating letters BTo enter a character on the same key as the previous character, press c to move the cursor right before pressing the

188CCOpen Source Licensing Remarks COpenSSL statements COpenSSL License CCopyright © 1998-2007 The OpenSSL Project. All rights reserved.Redistribution

Appendix C189CThis library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions

iDefinitions of warnings, cautions, and notesWe use the following icon throughout this User’s Guide:TrademarksBrother and the Brother logo are registe

Introduction101IPP 1The Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible printer via the internet

Appendix C190COpenLDAP Statements CThis product includes software developed by the OpenLDAP Project. CUnless otherwise expressly stated herein, The Op

Appendix C191C3. Redistributions must contain a verbatim copy of this document.The OpenLDAP Foundation may revise this license from time to time. Each

Appendix C192C3. The name "OpenLDAP" must not be used to endorse or promote products derived from this Software without prior written permis

Index193DDAAES ... 24APIPA ...

Index194DRRARP ... 9, 78, 171Remote Setup ... 1,

Introduction111IPv6 1This machine is compatible with the IPv6, the next generation internet protocol. For more information on the IPv6 protocol, visit

1222Overview 2Before using your Brother machine on your network, you must install the Brother software and also configure the appropriate TCP/IP netwo

Configuring your machine for a network with an Ethernet cable connection132If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addre

Configuring your machine for a network with an Ethernet cable connection142Setting the IP address and subnet mask 2Using the BRAdmin Light utility to

Configuring your machine for a network with an Ethernet cable connection152c Double-click the unconfigured device.Note• If the print server is set to

Configuring your machine for a network with an Ethernet cable connection162Using the control panel to configure your machine for a network 2You can co

Configuring your machine for a network with an Ethernet cable connection172Changing the print server settings 2Using the BRAdmin Light utility to chan

Configuring your machine for a network with an Ethernet cable connection182Using Web Based Management (web browser) to change the print/scan settings2

Configuring your machine for a network with an Ethernet cable connection192Using the Remote Setup to change the print server settings(not available fo

iiIMPORTANT NOTE This product is approved for use in the country of purchase only. Do not use this product outside the country of purchase as it may

2033Overview 3To connect your machine to your wireless network, you need to follow the steps in the Quick Setup Guide. We recommend that you use the S

Configuring your machine for a wireless network213Connected to a wireless capable computer without an access point on the network (Ad-hoc mode) 3This

Configuring your machine for a wireless network223Confirm your network environment 3The setup process will be different depending on your network envi

Configuring your machine for a wireless network233Configuration using a wireless computer. 3If your computer has wireless capability, you will need to

Configuring your machine for a wireless network243Authentication and encryption 3Most wireless networks use some kind of security settings. These secu

Configuring your machine for a wireless network253Network key 3There are some rules for each security method: Open system/Shared key with WEPThis key

Configuring your machine for a wireless network263Configuring your machine for a wireless network 3There are three methods to configure your wireless

Configuring your machine for a wireless network273i Choose <New SSID> using a or b.Press OK. Go to j.j Enter a new SSID. (For information how to

Configuring your machine for a wireless network283Using the SecureEasySetup™ software to configure your machine for a wireless network 3The SecureEasy

Configuring your machine for a wireless network293h If the following message appears, press a or b to choose On, then press OK. The wired network inte

iiiBrother numbersIMPORTANTFor technical and operational assistance, you must call the country where you purchased the machine. Calls must be made fro

Configuring your machine for a wireless network303Changing the print server settings 3Once you have configured your machine for a wireless network, yo

Configuring your machine for a wireless network313Note• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP ser

Configuring your machine for a wireless network323Using the Remote Setup to change the print server settings 3Remote Setup for Windows®3The Remote Set

3344The following instructions will install your Brother machine in a network environment using the Brother automatic installer application for Window

Wireless configuration for Windows®344e The CD-ROM main menu will appear. Click Install Other Drivers or Utilities.NoteIf this window does not appear

Wireless configuration for Windows®354g Read the Important Notice and click Next. h Choose Manual and then click Next.

Wireless configuration for Windows®364i For configuration, it is recommended that you temporarily connect your Brother wireless device directly to a f

Wireless configuration for Windows®374k If you choose This computer has wireless capability., check I am using an access point in infrastructure mode,

Wireless configuration for Windows®384l You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions. Pl

Wireless configuration for Windows®394Note• If a message to restart your computer appears after the wireless settings have been changed, restart your

ivInternet addressBrother Global Web Site: http://www.brother.comFor Frequently Asked Questions (FAQs), Product Support, Driver Updates and Utilities:

Wireless configuration for Windows®404n The following list appears. If the list is blank, check if the access point and the machine are powered on, an

Wireless configuration for Windows®414Note• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.

Wireless configuration for Windows®424q If your network is configured for Authentication and Encryption, the following screen will appear. When config

Wireless configuration for Windows®434s Follow the on-screen instructions. If you chose I’m able to temporarily connect my device to my access point

Wireless configuration for Windows®444t You have completed the wireless setup. Click Finish. If you would like to continue installing drivers and soft

Wireless configuration for Windows®454Configuration with an access point that supports SecureEasySetup™ 4For Windows® 2000/XP or Windows Vista™ 4IMPOR

Wireless configuration for Windows®464NoteIf this window does not appear, use Windows® Explorer to run the start.exe program from the root folder of t

Wireless configuration for Windows®474i Confirm the on-screen message and click Next. j Refer to the instruction manual that came with your access poi

Wireless configuration for Windows®484Configuration in Ad-hoc mode 4For Windows® 2000 Professional/XP or Windows Vista™ 4IMPORTANTIf you have previous

Wireless configuration for Windows®494NoteIf this window does not appear, use Windows® Explorer to run the start.exe program from the root folder of t

vTable of Contents1 Introduction 1Overview...

Wireless configuration for Windows®504i Choose I’m not able to connect my device to my access point with a network cable. Click Next. j Choose This co

Wireless configuration for Windows®514k You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions. Pl

Wireless configuration for Windows®524Note• If a message to restart your computer appears after the wireless settings have been changed, restart your

Wireless configuration for Windows®534m The following list appears. If the list is blank, check if the machine is powered on, and then click Refresh.

Wireless configuration for Windows®544Note• If your target Ad-hoc network is not broadcasting the SSID name and does not appear on the list, you can m

Wireless configuration for Windows®554p If your network is configured for Authentication and Encryption, the following screen will appear. When config

Wireless configuration for Windows®564r Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel.

Wireless configuration for Windows®574t You have completed the wireless setup. Click Finish. If you would like to continue installing drivers and soft

5855The following instructions will install your Brother machine in a network environment using the Brother automatic installer application for Macint

Wireless Configuration for Macintosh®595f Read the Important Notice and click Next. g Choose Manual and then click Next.

viChanging the print server settings...30Using

Wireless Configuration for Macintosh®605h For configuration, it is recommended that you temporarily connect your Brother wireless device directly to a

Wireless Configuration for Macintosh®615j If you choose This computer has wireless capability., check I am using an access point in infrastructure mod

Wireless Configuration for Macintosh®625k You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions.

Wireless Configuration for Macintosh®635m The following list appears. If the list is blank, check if the access point and the machine are powered on,

Wireless Configuration for Macintosh®645Note• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button

Wireless Configuration for Macintosh®655p If your network is configured for Authentication and Encryption, the following screen will appear. When conf

Wireless Configuration for Macintosh®665r Follow the on-screen instructions. If you chose I’m able to temporarily connect my device to my access poin

Wireless Configuration for Macintosh®675Configuration with an access point that supports SecureEasySetup™ 5For Mac OS®X 10.2.4 or greater 5IMPORTANTIf

Wireless Configuration for Macintosh®685f Read the Important Notice and click Next. g Make the following selection and click Next. h Confirm the on-sc

Wireless Configuration for Macintosh®695j Put the machine in SecureEasySetup™ mode.Press Menu, 7, 2, 3 for SecurEasySetup.NoteIf the LCD shows Connect

vii7 Driver Deployment Wizard (Windows® only) 106Overview...

Wireless Configuration for Macintosh®705Configuration in Ad-hoc mode 5For Mac OS®X 10.2.4 or greater 5IMPORTANTIf you have previously configured the w

Wireless Configuration for Macintosh®715f Read the Important Notice and click Next. g Choose Manual and then click Next. h Choose I’m not able to conn

Wireless Configuration for Macintosh®725i Choose This computer has wireless capability, and make sure I am using an access point in infrastructure mod

Wireless Configuration for Macintosh®735k To communicate with the un-configured wireless machine, temporarily change the wireless settings on your com

Wireless Configuration for Macintosh®745Note• If your target Ad-hoc network is not broadcasting the SSID name and does not appear on the list, you can

Wireless Configuration for Macintosh®755Note• If you want to set more than one WEP key, click Advanced.• If you do not know the Authentication or Encr

Wireless Configuration for Macintosh®765r To communicate with the configured wireless device, you must configure your computer to use same wireless se

7766LAN menu 6Before using your Brother product in a network environment, you need to configure the correct TCP/IP settings.In this chapter, you will

Control panel setup786d Press a or b to choose TCP/IP.Press OK.e Press a or b to choose BOOT Method.Press OK.f Press a or b to choose Auto, Static, RA

Control panel setup796IP Address 6This field displays the current IP address of the machine. If you have chosen a BOOT Method of Static, enter the IP

viii13 Internet fax 125Overview...

Control panel setup806g Enter the Subnet Mask address.Press OK.h Press Stop/Exit.Gateway 6This field displays the current gateway or router address us

Control panel setup816e Press a or b to choose Node Name.Press OK.f Press 1 to choose Change.g Enter the Node Name.Press OK.h Press Stop/Exit.WINS Con

Control panel setup826WINS Server 6Primary WINS Server IP Address 6This field specifies the IP address of the primary WINS (Windows® Internet Naming S

Control panel setup836DNS Server 6Primary DNS Server IP Address 6This field specifies the IP address of the primary DNS (Domain Name System) server.Se

Control panel setup846d Press a or b to choose TCP/IP.Press OK.e Press a or b to choose APIPA.Press OK.f Press a or b to choose On or Off.Press OK.g P

Control panel setup856Ethernet (wired network only) 6Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or

Control panel setup866WLAN Status (wireless network only) 6Status 6This field displays the current wireless network status; Active(11b), Active(11g),

Control panel setup876SSID 6This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID name.a Press Menu

Control panel setup886Set to Default 6The Set to Default allows you to reset each wired or wireless settings to the default. If you want to reset both

Control panel setup896WLAN Enable (wireless network only) 6If you want to use the wireless network connection, set WLAN Enable to On.a Press Menu.b Pr