Brother BAS-300G Bedienerhandbuch PDF herunterladen (Seite 41)

6. SEWING

BAS-300G, BAS-311G, BAS-326G

6. SEWING

WARNING

Do not allow any liquids to get onto this sewing machine, otherwise fire, electric shocks or operating problems may

occur.

If any liquid gets inside the sewing machine (machine head or control box), immediately turn off the power and

disconnect the power plug from the electrical outlet, and then contact the place of purchase or a qualified

technician.

CAUTION

Turn off the power switch at the following times.

If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result.

• When threading the needle

• When replacing the bobbin and needle

• When not using the machine and when leaving the machine unattended

Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in

personal injury or damage to the machine.

6-1. Sewing

1. Turn on the power switch.

2. Press the

or key (1) to select the sewing program

number that you would like to use.

* Refer to "5-2. Loading sewing data" for details on

reading sewing data from a CF card.

3. Depress the foot switch to the 2nd step.

(If using a two-pedal foot switch, lower the work clamp

before depressing the start switch (2).)

• The feed mechanism will move to the home position.

4. Place the article to be sewn underneath the work clamp

(3).

5. Depress the foot switch to the 1st step.

(If using a two-pedal foot switch, depress the work

clamp switch (4).)

• The work clamp (3) will drop.

6. Depress the foot switch to the 2nd step.

(If using a two-pedal foot switch, depress the start switch

(2).)

• The sewing machine will start sewing.

7. When sewing is complete, the thread will be trimmed

and the work clamp (3) will rise.

Use a work clamp that hold the article being sewn

firmly, without allowing it to slip.

If using the standard work clamp and feed plate and

the article being sewn is slipping, take measures to

stop the work clamp and feed plate from being

slippery.

4978Q

4441Q

1st step

2nd step

4979Q

2996B

1 2 ... 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Brother BAS-300G Bedienerhandbuch Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nähmaschinen Brother BAS-300G