Brother BAS-342G Bedienerhandbuch PDF herunterladen (Seite 52)

7. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

BAS-342G

To record another cycle program, repeat steps 2 to 4.

End cycle program recording mode.

TEST indicator switches off, MENU indicator illuminates

Press the TEST key.

This completes the recording of cycle programs.

• The cycle program number will flash in the PROGRAM

No. display.

1. Press the

or key (1) to select the cycle program

number that you would like to use.

• If the cycle program number is flashing, depress the

work clamp switch (2) to lower the work clamp, and

then depress the start switch (3). (The work clamp

will move to the sewing start position.)

• The cycle program number can be selected directly

by pressing function keys F1 to F4 (4). (Refer to "7-9.

Direct selection".)

2. Check that the needle drop position is correct, and then

start sewing. (Refer to "6-6 Checking the sewing

pattern".)

3. The recorded user program will be sewn step by step,

and when the final step is complete, the menu display

(5) will return to showing step 1.

• If you press the

or key (6), you can return to the previous step or skip to the next step respectively.

• If you press the SELECT key (7), you can check the details (such as X-scale, Y-scale and sewing speed) of the user

program for the displayed step. The setting cannot be changed at this time.

NOTE:

If cycle program sewing mode is active (when memory switch no. 401 is "ON") but no cycle programs have been

recorded, the user programs will be sewn in numeric order.

4439Q

4019M

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Keine Kommentare

Brother BAS-342G Bedienerhandbuch Seite 52