Brother FAX-4750e Bedienungsanleitung PDF herunterladen

Setting Up the machine and PC to Work Together

Before You begin

• Please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).

• Some illustrations are based on the MFC-8500.

Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).

You must set up the hardware and install the driver before you can use your machine as a printer and

scanner with your application. Brother offers both a Windows

Logo Tested (WHQL) driver and a Brother

Native Driver on the CD-ROM. The Windows

Logo Tested Driver is automatically installed when you follow

the installation steps below. The Brother Native driver offers some features that are not available with the

Windows

Logo Tested Driver. The features available on the Brother Native driver can vary by model.

Please see the README.WRI file on the CD-ROM or the visit us at

http://solutions.brother.com for details

on these features. You must follow steps 1 to 7 before you can proceed to the installation procedure for the

Brother Native Driver.

Installation of Brother Drivers for Windows

Step 1. Shut down and turn OFF your computer.

Step 2.

Unplug the FAX/MFC machine from the AC outlet and disconnect the interface cable

you have already connected it.

Step 3.

Turn on your computer.

Note: If the “Found New Hardware Wizard” appears before the installation of the software, you should click on

Cancel to exit the Wizard, and then start the installation program from the CD-ROM.

Step 4.

Insert the CD-ROM into the CD-ROM drive.

If the model name screen appears, click on your model name. The CD-ROM

main menu will appear.

If the CD-ROM does NOT start automatically, start the installer application by

clicking Start, Run, then type x:\ setup.exe (where x:\ is the drive letter of your CD-ROM drive).

Step 5.

Connect the machine to

your PC using the

parallel or USB cable.

*1 Multi-Function Link

Pro Suite includes Printer Driver, Scanner Driver, PC-FAX software and Remote Setup.

Scanner resolution: Up to 600 dpi

Paper size: 8.5" (215.9 mm) × 11.7" (297 mm)

2. Click Multi-Function Link

Pro

Suite in Main Application. *1

4. Select an interface cable, and

then press Next.

1. Click Install Software.

For Windows

XP Users

3. Click Install.

For Parallel

For USB

Please see

STEP

Version A

1 2 3

Inhaltsverzeichnis

Seite 1 - XP Users

Setting Up the machine and PC to Work TogetherBefore You begin• Please purchase the appropriate interface cable you intend to use with this machine (p

Seite 2 - Before You begin

Step 6.Turn on the machine by plugging in the power cord (and if necessary switch on themachine power switch).The installation of the Brother drivers

Seite 3

Install SoftwareYou can install printer and scanner drivers and the various utility items.On-Line RegistrationYou will be guided to a directory on the