Brother MFC-J870DW Bedienungsanleitung PDF herunterladen (Seite 33)

Receiving a fax

Remote Fax commands 4

Follow the commands in the table to access features when you are away from the machine. When

you call the machine and enter your remote access code (3 digits followed by ), the system will

give two short beeps and you must enter a remote command.

Remote commands Operation details

95 Change the Fax Forwarding,

Paging or Fax Storage settings

1 OFF You can choose Off after you have retrieved or erased all

your messages.

2 Fax Forwarding One long beep means the change is accepted. If you hear

three short beeps, you cannot make a change because

something has not been set up (for example, a Fax

Forwarding or Paging number has not been registered).

You can register your Fax Forwarding number by entering

4. (See Changing your Fax Forwarding number

on page 28.) Once you have registered the number, Fax

Forwarding will work.

3 Paging

4 Fax Forwarding number

6 Fax Storage

96 Retrieve a fax

2 Retrieve all faxes Enter the number of a remote fax machine to receive stored

fax messages. (See Retrieving fax messages on page 28.)

3 Erase faxes from the memory If you hear one long beep, fax messages have been erased

from the memory.

97 Check the receiving status

1 Fax You can check whether your machine has received any

faxes. If yes, you will hear one long beep. If no, you will hear

three short beeps.

98 Change the Receive Mode

1 External TAD If you hear one long beep, your change has been accepted.

2 Fax/Tel

3 Fax Only

90 Exit Pressing 9 0 allows you to exit remote retrieval. Wait for the

long beep, then replace the handset.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 96 97

Keine Kommentare

Brother MFC-J870DW Bedienungsanleitung Seite 33