Brother DCP-J152W Betriebsanweisung PDF herunterladen (Seite 52)

f Move the print head (if necessary) to

take out any paper remaining in this

area. Make sure that jammed paper is

not left in the corners of the machine (1)

and (2).

IMPORTANT

• DO NOT touch the encoder strip (1).

Doing this may cause damage to the

machine.

• If the print head is in the right corner as

shown in the illustration (2), you cannot

move it. Re-connect the power cord. Hold

down Stop/Exit until the print head moves

to the centre. Then unplug the machine

from the power source and take out the

paper.

• If the paper is jammed under the print

head, unplug the machine from the power

source, and then move the print head to

take out the paper.

Hold the concave areas with the triangle

marks as shown in the illustration (3) to

move the print head.

• If ink gets onto your skin, immediately

wash with soap and plenty of water.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 89 90

Keine Kommentare

Brother DCP-J152W Betriebsanweisung Seite 52