Brother MW-260 Bedienungsanleitung PDF herunterladen (Seite 32)

About P-touch Template

Data can be sent from a host (such as measuring instruments, scales and bar code

readers) and printed in a template previously transferred to the machine from P-touch

Editor.

P-touch Template commands consist of a prefix character and a two-character text string.

When the prefix character is sent, the machine begins the analysis of the P-touch

Template command, and performs the specified process if the following two-character

text string corresponds to a command.

Static and dynamic commands

With static commands, items specified with a setting command are saved and stored in

the memory.

With dynamic commands, items specified with a setting command are temporarily saved

and applied until the machine is turned off.

If printing does not begin (main most frequent causes)

1) The command mode is not in the P-touch Template mode.

2) The conditions for the print start trigger are not met.

The following three types of print start triggers exists, but this selection is incorrect.

i) When the specified text string is received

ii) When all objects are filled

iii) When the specified number of characters is received

If the settings described above are incorrect, use the machine setting tool to specify the

settings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 75 76

Keine Kommentare

Brother MW-260 Bedienungsanleitung Seite 32