Brother DCP-J140W Einstellungsanleitung PDF herunterladen (Seite 4)

Connect the power cord

a Connect the power cord.

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

a Make sure that the power is turned on.

The LCD shows:

No Ink Cartridge

b Open the ink cartridge cover a.

c Remove the green protective part a.

Important

DO NOT connect the USB cable yet (if you are

using a USB cable).

Note

The Warning LED on the control panel will stay on

until you have installed the ink cartridges.

Note

Make sure you install the Starter Ink Cartridges

included with your machine first.

Note

Do not throw away the green protective part. You

will need it if you transport the machine.

1 2 3 4 5 6 7 8 9 ... 31 32

Keine Kommentare

Brother DCP-J140W Einstellungsanleitung Seite 4