Brother MFC4450 Bedienungsanleitung PDF herunterladen (Seite 144)

TROUBLESHOOTING PROCEDURES

14-2

MFC 4450/OP-US-5.0

Error Messages

Occasionally, you may have a problem with your MFC or telephone line. If this

happens, your MFC usually identifies the problem and displays an error message.

Refer to the following list when you see an error message on the display.

Error messages are listed below in alphabetical order.

You can clear a print quality problem by

replacing the drum unit with a new one if the

display shows CHANGE DRUM. The drum

unit is at the end of its life.

If the display shows CHANGE TONER and at

the same time the Toner Empty LED on the

control panel flashes on and off, you can still

print. But the toner is depleted and it is telling

you that the toner will soon run out. Order a

new toner cartridge now.

The toner is used up and printing is not possible.

Replace the toner cartridge with a new one.

(See page 12-1~4.)

The MFC is out of paper or the paper is not

properly loaded in the multipurpose sheet

feeder. Refill the paper or remove the paper

and load it again.

Your Paper Size setting may not be set correctly

for the paper you are using (see page 6-5~6).

When you see this error, the reduction ratio

automatically will be changed to AUTO if you

have used a fixed reduction ratio (see page

6-7~8).

A poor quality phone line caused a

communications error. Try the call again.

You requested the polling function even though

the machine you called does not have the

polling feature.

CHANGE DRUM

CHANGE TONER

TONER EMPTY

CHECK PAPER SIZE

CHECK PAPER

CONNECTION FAIL

COMM.ERROR

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 168 169

Kommentare zu diesen Handbüchern

Keine Kommentare

Brother MFC4450 Bedienungsanleitung Seite 144

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Brother MFC4450