Brother DCP-110C Bedienungsanleitung PDF herunterladen (Seite 59)

100

5 - 1 TROUBLESHOOTING AND ROUTINE MAINTENANCE

Troubleshooting

Error messages

As with any sophisticated office product, errors may occur. If this

happens, your DCP identifies the problem and displays an error

message. The most common error messages are shown below.

You can correct most problems by yourself. If you need additional

help, the Brother Solutions Center offers latest FAQs and

troubleshooting tips.

Visit us at http://solutions.brother.com

Troubleshooting and routine

maintenance

ERROR MESSAGES

ERROR

MESSAGE

CAUSE ACTION

Cover is Open The scanner cover is not closed completely. Lift the scanner cover and then

close it again.

Data

Remaining

Print data remains in the DCP’s memory. Re-start printing from your

computer.

Print data remains in the DCP’s memory. The

USB cable was unplugged while the

computer was sending the data to the DCP.

Press Stop/Exit. The DCP will

cancel the job and eject the page

that is being printed.

High

Temperature

The print head is too warm. Allow the DCP to cool down.

Ink Empty One or more of the ink cartridges is empty.

The DCP will stop all print operations.

Replace the ink cartridges.

(See Replacing the ink cartridges on

page 5-20.)

Low

Temperature

The print head is too cold. Allow the DCP to warm up.

Media Error The media card is either corrupted,

improperly formatted, or there is a problem

with the media card.

Re-insert the card firmly into the slot

to make sure it is in the correct

position. If the error remains, check

the media drive by inserting another

media card that you know is

working.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Brother DCP-110C Bedienungsanleitung Seite 59

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucker Brother DCP-110C