Brother DCP-J152W Bedienungsanleitung PDF herunterladen (Seite 39)

Outline, Scan, and Copy or Cut

Outlining 4

 Use a red pen or marker with a tip width of 0.04-0.39 in. (1.0-10.0 mm), that is, from an extra-fine tip up to

an extra-thick marker tip.

 Outlined areas with thick red lines are easier to recognize. However, do not use a pen or marker with a tip

wider than indicated above.

 The red outline must not be broken and the line must not cross more than once.

 The outlined area must have a length and width of at least 0.4 in. (1 cm).

 If the paper has a dark background color, the outlined area may be difficult to recognize.

How to outline and scan a document 4

The areas outlined using a red pen are deleted from the scanned images.

For MFC-J650DW/J870DW/J875DW 4

When saving to media, insert the media before scanning.

a Using a red pen, outline the areas of the document that you want to scan.

b Load your document.

c Press d or c to display Web.

Press Web.

d If information regarding the Internet connection is displayed on the machine’s LCD, read the information

and press OK.

e You will be asked if you want to display this information again in the future.

Press Yes or No.

NOTE

Occasionally, updates or announcements about your machine's feature will be displayed on the LCD.

Read the information, and then press OK.

Good examples Bad examples

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Keine Kommentare

Brother DCP-J152W Bedienungsanleitung Seite 39