Brother HL-4200CN Bedienungsanleitung PDF herunterladen (Seite 58)

TROUBLESHOOTING 10 - 4

UNIX Troubleshooting

Make sure that the /etc/printcap file (if applicable) is typed in correctly. In particular, look for

missing ":" and "\" characters, because a small error anywhere in the file can have major

consequences. Also check the /usr/spool directory to make sure that you have created a valid

spool directory.

If you are using a Linux operating system, the X-Window Print tool program that is included with

Linux may not properly configure the etc/printcap file for lpd operation, then you might also edit the

etc/printcap file and change the following line in the entry for the printer.

:lp = /dev/null: \

then to

:lp = :\

If you are using a Berkeley-based UNIX, make sure that the daemon is started on Berkeley based

systems with the command lpc start printer, where printer is the name of the local print queue.

If you are using an AT&T-based UNIX, make sure the printer is enabled (enable printer, where

printer is the name of the local print queue).

Make sure that the lpr/lpd remote line printer service are running on the host computer (refer to your

host computer documentation for information on how to do this).

If you are using Sun Solaris V2.4 or earlier, there is a bug which causes long print jobs to fail when

using a print server. If you are having trouble printing long jobs (over 1MB), add the line mx#0 to

your etc/printcap file entry.

If you cannot print from DEC TCP/IP Service for VMS (UCX), make sure that you have version 2.0B

or later of this software, because earlier versions will not work with Brother print servers.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63

Keine Kommentare

Brother HL-4200CN Bedienungsanleitung Seite 58