Brother BAS-342G Bedienerhandbuch PDF herunterladen (Seite 68)

11. STANDARD ADJUSTMENTS

BAS-342G

11-9. Adjusting the position of the movable knife

1. Open the top cover and tilt back the machine head.

2. Turn the pulley (1) by hand to lower the needle bar to its lowest position, and push the thread trimmer solenoid (2) as far

as it will go.

3. With the collar (3) inserted into the groove of the thread trimmer cam (4), turn the pulley (1) by hand to set the driving lever

(5) to the reverse position (when the thread take-up (6) is close to its lowest position).

4. Remove the rubber cap (7).

5. Loosen the bolt (8).

6. Move the movable knife connecting plate (10) back and forth to adjust so that the distance from the ridge on the right side

of the needle plate to the ridge on the movable knife (9) is 9.5 to 9.9 mm.

7. After tightening the bolt (8), check the above position once more.

5232Q 4039M

5255Q

5233Q

Reverse position

4004M

4040M

4041M

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 83 84

Keine Kommentare

Brother BAS-342G Bedienerhandbuch Seite 68