Brother Computerized Sewing and Quilting Machine Bedienerhandbuch PDF herunterladen (Seite 54)

SELECTING A UTILITY STITCH

Utility Stitches

Selecting a Stitch

Turn on the machine, and then lightly press

the display.

→ Depending on the setting, either “Q-01 Piecing

stitch (Middle)”, “1-01 Straight stitch (Left)” or “1-03

Straight stitch (Middle)” is automatically selected.

Press to display a screen

of the stitches in the selected category, and

then select a stitch.

→ An image of the selected stitch is displayed below

the symbol of the appropriate presser foot.

■ Using the Mirror Image Key

Press so that it appears as . A mirror

image of the selected stitch is created.

Saving Stitch Settings

This machine is preset with the default settings for the

stitch width (zigzag width), stitch length, thread tension,

automatic thread cutting, automatic reverse/

reinforcement stitching, etc. However, if you wish to

save specific settings for a stitch so that they can be

used later, press after changing the settings to

save the new settings with the selected stitch.

Example: Using a stitch length of 2.0 mm for the

straight stitch

Press , and then select a straight stitch.

Set the stitch length to 2.0 mm.

Press .

* To reset the selected stitch to its default settings,

press , and then press .

Memo

For details on the stitches, refer to “STITCH SETTING

CHART” at the end of this manual.

Note

If appears as after a stitch (buttonholes,

multi-directional sewing patterns, etc.) is selected, a

mirror image of the selected stitch cannot be created.

Memo

The default stitch length is 2.5 mm.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 161 162

Keine Kommentare

Brother Computerized Sewing and Quilting Machine Bedienerhandbuch Seite 54