Brother Computerized Sewing and Quilting Machine Bedienerhandbuch PDF herunterladen (Seite 81)

SEWING THE STITCHES

Remove the basting, and then turn over the

fabric.

a Wrong side of fabric

b Surface of fabric

■ If the Needle Does Not Catch the Fold

Press in the width display so that the needle

slightly catches the fold.

■ If the Needle Catches Too Much of the Fold

Press in the width display so that the needle

slightly catches the fold.

Appliqués

Use a temporary spray adhesive or basting to

attach the appliqué to the fabric.

a Appliqué

b Fabric glue

Press or .

Attach presser foot “J”, and then sew along

the edge of the appliqué, making sure that the

needle drops slightly off the edge.

a Appliqué

a Needle drop point

Memo

Blind hem stitches cannot be sewn if the needle does

not catch the fold on the left side. However, if the

needle catches too much of the fold, the fabric cannot

be unfolded and too much of the seam will appear on

the surface of the fabric, leaving an unattractive finish.

If either of these occur, follow the instructions below to

correct the problem.

Memo

• Adjust the stitch width and length according to the

shape, size and fabric quality of the appliqué (see

page 44).

• For details on the stitches, refer to the “STITCH

SETTING CHART” at the end of this manual.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 161 162

Keine Kommentare

Brother Computerized Sewing and Quilting Machine Bedienerhandbuch Seite 81