Brother Computerized Sewing and Quilting Machine Bedienerhandbuch PDF herunterladen (Seite 83)

SEWING THE STITCHES

Leave a seam when sewing the scallop

stitches so that the pattern is not sewn

directly on the edge of the fabric.

Trim along the seam, making sure not to cut

the stitches.

Top Stitching

For a decorative effect in a crazy quilt, stitches can be

sewn over a pressed seam allowance.

Select a straight stitch, and then attach

presser foot “J”.

With right sides together, sew two pieces of

fabric, and then open the seam allowances.

a 6.5 mm (1/4inch)

b Wrong side of fabric

c Straight stitch

d Seam allowance

Turn the fabric over so the right side faces up,

and then sew over the seam with the center of

the presser foot aligned with the seam.

* Select one of the following stitches.

a Surface of fabric

Smocking

The decorative stitching created by sewing over gathers

is called smocking. It is used to decorate the front of

blouses or cuffs.

Select a straight stitch, and then attach

presser foot “J”.

Set the stitch length to 4.0 mm (approx.

3/16 inch) and the thread tension to 2.0

(loose tension).

Pull out 50 mm (approx. 1-15/16 inches) of

both the upper and bobbin threads.

Sew stitching 10 mm (approx. 3/8 inch) apart.

a Approximately 10mm (approx. 3/8 inch)

Note

Sew test stitches on the fabric before sewing on your

project.

Note

Make sure that the automatic reverse/reinforcement

stitching and automatic thread cutting settings are not

selected.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 161 162

Keine Kommentare

Brother Computerized Sewing and Quilting Machine Bedienerhandbuch Seite 83