Brother FAX-8360P Bedienungsanleitung PDF herunterladen (Seite 51)

ADVANCED FAX USE

Advanced Receiving 43

ZLeFAX-UK-FM6.0

Advanced Receiving

Operation from an External or

Extension Telephone

An external phone is a telephone that is plugged into the machine (either into the machine’s EXT

socket or into the back of the connector that plugs into the telephone wall socket).

An extension phone is another phone on the same phone number as the machine, but plugged into a

different telephone wall socket. For example, the machine may be connected to a phone line in your

study, and you may have another phone on the same line (and same phone number) in your kitchen.

This feature enables you to answer the phone in the kitchen if it rings while you are making a coffee,

knowing that you can transfer the call to the machine if the incoming call is a fax.

If you answer a fax call on an external or extension phone, you can make the machine take over by

using the Activation Code. When you press the Activation Code 5 1, the machine starts to receive

a fax. If you set FAX DETECT to ON, you don’t have to press 5 1, just hold the handset and

wait for several seconds. (See Fax Detect (with an External or Extension Telephone), page 27.)

If the machine answers a voice call and F/T pseudo-rings for you to take over, use the Deactivation

Code # 5 1 to take the call at an extension phone. (You have to set Remote Activation to ON in

Menu, 2, 1, 4 to use 5 1 or # 5 1.)

If you answer a call, and no one is on the line, assume you are receiving a fax. At an extension phone,

press 5 1, wait for fax receiving tones (chirps), then hang up. At an external phone, press 5 1

and wait for the phone to be disconnected (the screen displays RECEIVING) before you hang up.

(Your caller will have to press Start to send the fax.)

The Remote Activation Code can also be used by your callers. When you are using an external TAD,

your outgoing message (OGM) should end with the statement “to send a fax, press 5 1”. (See

Outgoing Message (OGM) of External TAD, page 7.)

For Fax/Tel Mode Only

When the machine is in Fax/Tel (F/T) Mode, it will use the F/T Ring Time (F/T pseudo-ringing*) to

alert you to a voice call. If you’re at the machine, you can lift the external telephone’s handset and

press Tel to answer.

If you’re at an extension phone, you will need to lift the handset during the F/T Ring Time and press

# 5 1 between the F/T pseudo-rings. If no one is on the line, or if someone wants to send you a fax,

send the call back to the machine by pressing 5 1.

* pseudo-ringing is a ring tone produced by the machine. The sender’s telephone line is connected

to the machine at this moment.

If you accidentally pick up an extension phone when a fax message is being

received, you may disrupt the transmission or render some portions unreadable.

5 1—From an extension phone, or an external phone, 5 1 will set the

machine in receive mode.

# 5 1—From an extension phone, # 5 1 can stop the machine receiving. This is

effective in F/T and Fax Detect modes.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 111 112

Keine Kommentare

Brother FAX-8360P Bedienungsanleitung Seite 51