Brother MFC-8670DN Betriebsanweisung PDF herunterladen (Seite 83)

Remote fax options

Remote fax commands

Follow the commands below to access features when you are away from the machine. When you

call the machine and enter your Remote Access Code (3 digits followed by l), the system will

give two short beeps and you must enter a remote command.

Remote commands Operation details

95 Change the fax forwarding,

paging or fax storage settings

1 OFF You can choose Off after you have retrieved or erased all your

messages.

2 Fax forwarding One long beep means the change is accepted. If you hear three

short beeps, you cannot change because something has not

been set up (for example, a fax forwarding or paging number

had not been registered). You can register your fax forwarding

number by entering 4. (See Changing the Fax Forwarding

number on page 68.) Once you have registered the number,

fax forwarding will work.

3 Paging

4 Fax forwarding number

6 Fax storage

96 Retrieve a fax

2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax

message(s). (See Retrieving fax messages on page 68.)

3 Erase faxes from the memory If you hear one long beep, fax messages have been erased

from the memory.

97 Check the receiving status

1 Fax You can check whether your machine has received any faxes.

If yes, you will hear one long beep. If no, you will hear three

short beeps.

98 Change the receive mode

1 External TAD If you hear one long beep, your change has been accepted.

2 Fax/Tel

3 Fax Only

90 Exit Press 9, 0 to exit remote retrieval. Wait for the long beep, then

replace the handset.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 195 196

Keine Kommentare

Brother MFC-8670DN Betriebsanweisung Seite 83