Brother BAS-342G Bedienerhandbuch PDF herunterladen (Seite 35)

5. PREPARATION BEFORE SEWING

BAS-342G

5-8. Setting 2-step operation for the work clamp

When these settings are made, the work clamp (1) can be

lowered in two steps.

1. Set memory switch No. 002 to "1".

(Refer to "7-2. Setting memory switches".)

2. With the work clamp (1) raised, loosen the wing screw

(2).

3. Move the work clamp stopper (3) up or down to determine

the intermediate position, and then tighten the wing screw

(2) to secure the work clamp stopper (3) in place.

4. Depress the work clamp switch (4) to the 1st step and

check the intermediate position for the work clamp.

5. Depress the work clamp switch (4) to the 2nd step to fully

lower the work clamp.

2-step work clamp operation is enabled when memory

switch No. 002 is set to "1".

Do not set memory switch No. 002 to "2".

1. Set memory switch No. 002 to "0".

(Refer to "7-2. Setting memory switches".)

2. With the work clamp (1) raised, loosen the wing screw (2).

3. Move the work clamp stopper (3) to its highest position,

and then tighten the wing screw (2) to secure the work

clamp stopper (3) in place.

1st step

2nd step

1st step

2nd step

Intermediate

position

4009M

4010M

4011M

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Keine Kommentare

Brother BAS-342G Bedienerhandbuch Seite 35