Brother Computerized Sewing and Quilting Machine Bedienerhandbuch PDF herunterladen (Seite 42)

SEWING

Sewing Basics

To stop sewing, press the “Start/Stop” button

again.

Press the “Thread Cutter” button to trim the

threads.

→ The needle automatically stops in the raised

position, and the feed dogs are lowered.

Raise the presser foot and remove the fabric.

■ Using the Foot Controller

You can also use the foot controller to start and stop

sewing.

Insert the foot controller plug into its jack on

the machine.

a Foot controller

b Foot controller jack

Slowly press the foot controller to start

sewing.

Release the foot controller to stop the

machine.

CAUTION

• Do not press the “Thread Cutter” button after the

threads have been cut. Doing so could tangle the

thread or break the needle and damage the machine.

• Do not press the “Thread Cutter” button when there

is no fabric set in the machine or during machine

operation. The thread may tangle, possibly resulting

in damage.

Note

When cutting thread thicker than #30, nylon thread or

other decorative threads, use the thread cutter on the

side of the machine.

Memo

When the “Thread Cutter” button is pressed, the feed

dogs are automatically lowered so the fabric can easily

be removed, and then they are raised when sewing is

started.

Note

This machine is equipped with a bobbin thread sensor

that warns you when the bobbin thread is almost

empty. When the bobbin thread is nearly empty, the

machine stops automatically and a message appears

in the screen. When this message appears, change

the bobbin with one full of thread. However, if the

“Start/Stop” button is pressed, a few stitches can be

sewn.

CAUTION

• Do not allow fabric pieces and dust to collect in the

foot controller. Doing so could cause a fire or an

electric shock.

Memo

When the foot controller is being used, the “Start/Stop”

button has no effect on sewing.

Memo

The speed set using the sewing speed controller is the

foot controller’s maximum sewing speed.

Memo

(For U.S.A. only)

Foot controller: Model T

This foot controller can be used with model QC-1000.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 161 162

Kommentare zu diesen Handbüchern

Keine Kommentare

Brother Computerized Sewing and Quilting Machine Bedienerhandbuch Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nähmaschinen Brother Computerized Sewing and Quilting Machine