Brother Computerized Sewing and Quilting Machine Bedienerhandbuch PDF herunterladen (Seite 85)

SEWING THE STITCHES

Tape or Elastic Attaching

Elastic tape is sewn onto the fabric unstretched.

Select a straight stitch, and then attach

presser foot “J”.

Set the stitch length to 4.0 mm (approx.

3/16 inch) and the thread tension to 2.0

(weaker tension).

Pull out 50 mm (approx. 1-15/16 inches) of

both the upper and bobbin threads (see

“Pulling Up the Bobbin Thread” on page 28).

a Upper thread

b Bobbin thread

c 50 mm

Sew two rows of straight stitches on the

surface of the fabric, and then pull the bobbin

threads to create the desired amount of

gather.

Pin the elastic tape to the wrong side of the

fabric with the elastic tape evenly positioned

on the gathers.

a Elastic tape

Press or .

While pulling the elastic tape so that it is

about the same length as the fabric, pull the

fabric at the pin nearest the front of the

presser foot with your right hand, and feed

the fabric behind the presser foot with your

left hand according to the feeding speed.

Pull out the threads for the straight stitches.

Note

Make sure that the automatic reverse/reinforcement

stitching and automatic thread cutting settings are not

selected.

Memo

For details on the stitches, refer to “Stitch Setting

Chart” at the end of this manual.

Memo

This is easy to do if the foot controller is used.

CAUTION

• Be sure the needle does not strike a basting pin, or

any other objects, during sewing. The thread could

tangle or the needle could break, causing injury.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 161 162

Kommentare zu diesen Handbüchern

Keine Kommentare

Brother Computerized Sewing and Quilting Machine Bedienerhandbuch Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nähmaschinen Brother Computerized Sewing and Quilting Machine