Brother Computerized Sewing and Quilting Machine Bedienerhandbuch PDF herunterladen (Seite 89)

SEWING THE STITCHES

Select a stitch, and then attach presser foot

“A”.

Mark the position and length of the

buttonhole on the fabric.

Pull out the button holder plate on the presser

foot, and then insert the button that will be

put through the buttonhole.

* The size of the buttonhole is set by clamping the

button in the button holder plate.

a Button holder plate

Hold the outside frame of the buttonhole foot

toward the back with your finger, and then

lower the presser foot so that the mark on the

fabric aligns with the marks on the buttonhole

foot.

a Mark on fabric

b Marks on presser foot

Pull down the buttonhole lever.

* The buttonhole lever should be positioned behind

the metal bracket on the buttonhole foot, as shown

in the illustration.

a Buttonhole lever

a Metal bracket

Memo

The maximum buttonhole length is 28 mm (approx. 1-

1/6 inches) (diameter + thickness of the button).

Note

Pass the thread under the presser foot.

Note

• Slide the outside frame of the buttonhole foot

backward as far as possible, making sure that there

is no gap behind the part of the foot marked “A”, as

shown in the illustration. If the buttonhole foot is not

slid back as far as possible, the buttonhole will not

be sewn at the correct size.

• Pass the thread under the presser foot.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 161 162

Keine Kommentare

Brother Computerized Sewing and Quilting Machine Bedienerhandbuch Seite 89