Brother S-7200C Bedienerhandbuch PDF herunterladen (Seite 15)

S-7200C

3. INSTALLATION

3-3. Lubrication (-[]0[], []3[] specifications)

* If the sewing machine is -[]5[] specifications, it is a complete dry type machine, and so no lubrication is necessary.

CAUTION

Do not connect the power cord until lubrication has been completed, otherwise the machine may operate if the

treadle is depressed by mistake, which could result in injury.

Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get

into your eyes or onto your skin, otherwise inflammation can result.

Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and

diarrhea.

Keep the oil out of the reach of children.

When cutting the nozzle of the oil tank, hold the base of the nozzle securely.

If you hold the end of the nozzle, injury from the scissors may result.

 The sewing machine should always be lubricated and the

oil supply replenished before it is used for the first time,

and also after long periods of non-use.

 Use only the lubricating oil <Nippon Oil Corporation

Sewing Lube 10N; VG10> specified by Brother.

* If this type of lubricating oil is difficult to obtain, the

recommended oil to use is <Exxon Mobil Essotex SM10;

VG10>.

1. Hold the base of the nozzle of the accessory oil tank (1),

and use scissors to cut about half-way along the straight

section (A) of the nozzle.

2. Loosen and remove the nozzle, and then remove the seal

(2).

3. Tighten the nozzle.

4. Open the oil feeding pocket cover (3).

5. Insert the nozzle of the oil tank (1) deeply into the oil

feeding pocket (4), and then add about 120 ml of

lubricating oil.

6. Check that the oil gauge (6) comes to the upper reference

line in the oil gauge window (5).

7. Close the oil feeding pocket cover (3).

Be sure to add more oil if the oil gauge (6) is below the lower

reference line.

Upper reference

line

Lower reference

line

4136M

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Keine Kommentare

Brother S-7200C Bedienerhandbuch Seite 15