Brother PJ673-K Betriebsanweisung PDF herunterladen (Seite 16)

Chapter 1

12

f When the WIRELESS LAN indicator

stops blinking and remains lit, the printer

is connected.

Print from the printing software created

with the SDK.

NOTE

It may take more than 1 minute to

establish a wireless LAN connection.

Since it differs depending on the device

and environment, check with the device

manufacturer.

̈ If printing is not possible

In the following cases, the wireless LAN

connection between the printer and iOS

device will be cut, preventing printing.

1 The iOS device has entered sleep

mode.

2 The printer has been turned off.

3 The printer has been switched to

USB mode.

For the cases mentioned above, perform

the operations below to re-establish the

connection.

1 Select the SSID for the ad-hoc mode

for step e on page 11.

2 Select the connection for step a on

page 11.

3 Hold down the (Power) button for at

least 3 seconds to enter wireless LAN

mode, and then select the SSID for the

ad-hoc mode for step c on page 11.

Setting Up the Printer

(With the Default Settings Changed)

1

NOTE

• A computer running Windows

®

and

a USB cable are required to change

the printer’s default settings, even if the

printer will be used by an iOS device via

a wireless LAN connection. In the

process, the printer driver for a USB

connection will be installed on the

computer running Windows

®

.

• In order to use the printer via a wireless

LAN connection, settings must be

specified on both the printer and the iOS

device. The printer settings will be

specified with the printer driver; however,

the settings on the iOS device must be

specified manually. Specify the settings

according to the procedures in this

manual.

• With administrator rights, log onto the

computer running Windows

®

.

• If, while specifying the settings, a dialog

box appears, requesting administrator

rights or requesting confirmation to

perform the operation with administrator

rights, follow the instructions.

• If, while specifying the settings, a dialog

box appears, requesting confirmation to

continue the installation, continue it.

• The descriptions in this manual apply to

wireless network connections that can be

set up using a standard procedures for

your operating system. For any other

cases, refer to the instruction manual

included with your wireless adapter.

a If you have the included CD-ROM, insert

it into your computer’s CD-ROM drive,

and then click [Standard Installation] in

the installer screen that appeared. If the

Web version was download, run the

downloaded file.

Click [Next].

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 74 75

Kommentare zu diesen Handbüchern

Keine Kommentare