Brother PJ673-K Betriebsanweisung PDF herunterladen (Seite 27)

Setting Up the Printer

b Select [Wireless Network

Connection], and then click [Next].

c With the USB cable, connect the printer

to the computer running Windows

, and

then turn on the printer. If the printer is

in wireless LAN mode (the WIRELESS

LAN indicator is blinking), switch it to

USB mode. For details, see Switching

Between Wireless LAN Mode and USB

Mode on page 30.

The next screen will automatically

appear.

d Type in the new settings, and then click

[Send Settings].

Make a note of the specified settings.

NOTE

• The WEP key normally appears as shown

by A, regardless of the setting retrieved by

the printer at startup.

• When changing the WEP key, type in

5 or 13 ASCII characters or 10 or 26

hexadecimal characters. The WLAN

settings can later be changed with the

PJ-673 Utility on a computer running

Windows

. For details, see WLAN

Settings on page 51 in PJ-673 Utility

Menu.

[Communication Mode],

[Authentication Method] and [Boot

Method] have been set to [Ad-hoc].

[Open system] and [STATIC],

respectively, and cannot be changed.

SSID

IP Address

Subnet Mask

WEP Key

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 74 75

Keine Kommentare

Brother PJ673-K Betriebsanweisung Seite 27