Brother PJ673-K Betriebsanweisung PDF herunterladen (Seite 67)

Troubleshooting

I want to print using either a wireless LAN

connection or a USB connection.

Set up the printer for both a wireless LAN connection and

a USB connection. If the printer was set up for only one

communication method, it cannot be switched.

̈ If the wireless LAN driver was not installed during the USB

installation:

a. With the default settings

See Adding a Printer on page 19.

b. With the default settings changed

See Setting Up the Printer (With the Default Settings

Changed) on page 22.

If printing is not possible after performing step a. and b.

Check the network connection.

See Setting Up the Computer Running Windows

on page 17.

In addition, see Switching Between Wireless LAN Mode

and USB Mode on page 30.

̈ If you still cannot print using the interface you want to use,

make sure you have selected the correct interface.

When the printer is installed, Brother PJ-673 and Brother

PJ-673 USB drivers are installed.

If printing is still not possible, see Switching Between

Wireless LAN Mode and USB Mode on page 30.

̈ If the printer interface cannot be switched:

See Switching Between Wireless LAN Mode and USB

Mode on page 30.

The wireless connection takes time. From initialisation to completing the connection takes time,

so it may take 1 minute or more to establish the wireless LAN

connection. Since this differs depending on the device and

environment, check with the device manufacturer. For details

on the printer’s wireless LAN preparation time, see Switching

Between Wireless LAN Mode and USB Mode on page 30.

Problem Solution

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 73 74 75

Keine Kommentare

Brother PJ673-K Betriebsanweisung Seite 67