S-7200C
3. INSTALLATION
14
3-5. Test operation (Operating the treadle)
CAUTION
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
1. Turning on the power
Press the ON power switch (1).
The power indicator (2) will illuminate.
2. Test operation
1. Check that the machine sews at low speed when the
treadle (1) is gently pressed to position (B).
2. Then check that it sews at high speed when the treadle
(1) is gently pressed to position (C).
3. After pressing the treadle (1) forward, check that the
needle is lowered to the top of the needle plate when the
treadle (1) is returned to the neutral position (A). (when
needle down stopping has been set.)
4. If the treadle (1) is pressed to position (D), thread
trimming is carried out and the needle then rises above
the needle plate and stops.
3648M
2117M
2114M
4307M
Kommentare zu diesen Handbüchern