Brother S-7200C Bedienerhandbuch PDF herunterladen (Seite 31)

S-7200C

5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS)

5-5. Sewing name labels

Setting the number of name label stitches

From 1 to 1999 stitches can be set for the E and F stitch numbers.

After the set number of stitches in E (fixed stitches) have been sewn, the needle bar stops in

the position that has been set by the needle up/down key (refer to p.27).

After the set number of stitches in F (fixed stitches) have been sewn, the needle bar stops in

the position that has been set by the needle up/down key (refer to p.27).

Repeat steps 2 and 3 above.

Thread trimming is carried out.



<If using a solenoid-type presser lifter>



After the fixed stitches in E and F are sewn, the presser foot is also lifted automatically.

<Automatic thread trimming>



Press the thread trimming key to turn on the thread trimming function. Thread trimming is carried out

automatically after the second set of F stitches has been sewn.

<Automatic sewing>



When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches in E and F

are sewn respectively simply by depressing the treadle once without needing to depress it

continuously.

<Start and end backtack sewing>



• The start backtack key and end backtack key can be pressed to turn on the backtack sewing

function.

• If changing the number of start and end backtack stitches in A, B, C and D, press the name label

stitch key to turn off the name label function before making the change. (The ABCD display will

show the number of stitches and the settings can then be changed.)

0835M

4179M

Example:

2159M

2160M

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

Keine Kommentare

Brother S-7200C Bedienerhandbuch Seite 31